Files
PX4-Autopilot/docs/en/assembly
Hamish Willee 272f3280d7 docs(boards): restructure Pixhawk 4 page to the board template (#29590)
* docs(boards): restructure Pixhawk 4 page to the board page template

Move the existing content into the flight-controller page template's
sections, headings and anchors, with no change to what the page says,
so that the content additions that follow can be reviewed on their own.

The Quick Summary list becomes Specifications sub-sections, the
connector image moves into Pinouts and the dimensions image into
Mechanical Data, Voltage Ratings moves before Serial Port Mapping,
and Further info becomes Further Information. Port labels are in code
style, and units follow the docs style guide. Links to the changed
anchors are updated.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Hamish Willee <hamishwillee@gmail.com>

* docs(boards): add Pixhawk 4 PWM outputs, power and setup sections

Fill in the sections the board page template expects, from the board
source (boards/px4/fmu-v5) and Holybro's datasheet, pinouts and
product page.

- Mark the board discontinued by Holybro but still supported by PX4,
  with matching SUMMARY, sidebar and category entries
- Specifications: current IO processor, sensor buses, USB, parameter
  storage, SD card, max input voltage and current sensing, and the
  datasheet weight
- PWM Outputs: IO and FMU outputs, no DShot, timer groups, and the
  capture inputs on CAP & ADC IN
- Power, SD Card, Radio Control, GPS & Compass, Telemetry and CAN
- Serial Port Mapping: USART1, flow control column, printed port
  labels, and the same table on the serial port mapping page
- Debug Port: Pixhawk Debug Mini, and the console UART

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Hamish Willee <hamishwillee@gmail.com>

* docs(boards): fix Pixhawk 4 specs, links and wording from review

Take the weight and operating temperature from Holybro's latest
datasheet, and link that datasheet in place of the older in-repo copy,
which contradicted the page.

Give the serial and I2C interface lines in the board page template's
form, where the board source and Holybro's pinout agree, and add the
template content the page was missing: the servo rail note, capture
pins as outputs, DSM/S.BUS receiver power pins, the internal compass,
and how to enable a second GPS (GPS_2_CONFIG has no default).

Also fix the wiring quick start's link text for the renamed Pinouts
heading, and make S.BUS spelling and port labels consistent.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Hamish Willee <hamishwillee@gmail.com>

* docs(boards): apply Holybro corrections and discontinued markers to Pixhawk 4

Holybro confirmed the board is discontinued and corrected the weight,
operating temperature, input voltage limits, RC port routing and DShot
support. The discontinued markers follow the earlier discontinued board
pages, and the Pixhawk Standard list now separates discontinued boards.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Hamish Willee <hamishwillee@gmail.com>

---------

Signed-off-by: Hamish Willee <hamishwillee@gmail.com>
2026-11-05 08:45:43 +11:00
..
2025-06-26 11:03:23 -07:00