mirror of
https://github.com/PX4/PX4-Autopilot.git
synced 2026-11-22 22:50:49 +08:00
The battery current check was removed in #19570, as the total current cannot tell which multicopter motor failed. In fixed-wing flight the propulsion draws most of the current, so a battery current below COM_EF_CURR with the throttle above COM_EF_THROT shows a failed motor, ESC or propeller without ESC telemetry. The vehicle executes COM_ACT_FAIL_ACT, as for the ESC-based motor failure check, and a standard VTOL also triggers the pusher failure quad-chute once below VT_FW_QC_HMAX, which blocks front transitions. The check is disabled by default (COM_EF_CURR), needs a current measurement on every connected battery, and is only built for boards that fly fixed-wing. Assisted-by: Claude:claude-opus-5-5 Co-authored-by: Mathéo Taillandier <matheo.taillandier@gmail.com> Signed-off-by: jonas <jonspero@me.com>
68 lines
3.8 KiB
Plaintext
68 lines
3.8 KiB
Plaintext
# Input flags for the failsafe state machine set by the arming & health checks.
|
|
#
|
|
# Flags must be named such that false == no failure (e.g. _invalid, _unhealthy, _lost)
|
|
# The flag comments are used as label for the failsafe state machine simulation
|
|
|
|
uint64 timestamp # time since system start (microseconds)
|
|
|
|
# Per-mode requirements
|
|
uint32 mode_req_angular_velocity
|
|
uint32 mode_req_attitude
|
|
uint32 mode_req_local_alt
|
|
uint32 mode_req_local_position
|
|
uint32 mode_req_local_position_relaxed
|
|
uint32 mode_req_global_position
|
|
uint32 mode_req_global_position_relaxed
|
|
uint32 mode_req_mission
|
|
uint32 mode_req_offboard_signal
|
|
uint32 mode_req_home_position
|
|
uint32 mode_req_wind_and_flight_time_compliance # if set, mode cannot be entered if wind or flight time limit exceeded
|
|
uint32 mode_req_prevent_arming # if set, cannot arm while in this mode
|
|
uint32 mode_req_manual_control
|
|
uint32 mode_req_other # other requirements, not covered above (for external modes)
|
|
uint32 mode_not_supported # if set, mode is not supported by the current vehicle architecture
|
|
|
|
# Mode requirements
|
|
bool angular_velocity_invalid # Angular velocity invalid
|
|
bool attitude_invalid # Attitude invalid
|
|
bool local_altitude_invalid # Local altitude invalid
|
|
bool local_position_invalid # Local position estimate invalid
|
|
bool local_position_invalid_relaxed # Local position with reduced accuracy requirements invalid (e.g. flying with optical flow)
|
|
bool local_velocity_invalid # Local velocity estimate invalid
|
|
bool global_position_invalid # Global position estimate invalid
|
|
bool global_position_invalid_relaxed # Global position estimate invalid with relaxed accuracy requirements
|
|
bool auto_mission_missing # No mission available
|
|
bool offboard_control_signal_lost # Offboard signal lost
|
|
bool home_position_invalid # No home position available
|
|
|
|
# Control links
|
|
bool manual_control_signal_lost # Manual control (RC) signal lost
|
|
bool gcs_connection_lost # GCS connection lost
|
|
|
|
# Battery
|
|
uint8 battery_warning # Battery warning level (see BatteryStatus.msg)
|
|
bool battery_low_remaining_time # Low battery based on remaining flight time
|
|
bool battery_unhealthy # Battery unhealthy
|
|
|
|
# Failure detector
|
|
bool fd_critical_failure # Critical failure (attitude limit exceeded, or external ATS)
|
|
bool fd_esc_arming_failure # ESC failed to arm
|
|
bool fd_imbalanced_prop # Imbalanced propeller detected
|
|
bool fd_motor_failure # Motor failure
|
|
bool fd_motor_stuck_failure # Motor-stuck failure during spool-up
|
|
bool fd_alt_loss # Uncommanded altitude loss (rotary-wing, altitude-controlled flight)
|
|
bool fd_fw_motor # Fixed-wing propulsion failure: battery current too low for the throttle
|
|
|
|
# Other
|
|
bool geofence_breached # Geofence breached (one or multiple)
|
|
bool mission_failure # Mission failure
|
|
bool vtol_fixed_wing_system_failure # vehicle in fixed-wing system failure failsafe mode (after quad-chute)
|
|
bool wind_limit_exceeded # Wind limit exceeded
|
|
bool flight_time_limit_exceeded # Maximum flight time exceeded
|
|
bool position_accuracy_low # Position estimate has dropped below threshold, but is currently still declared valid
|
|
bool navigator_failure # Navigator failed to execute a mode
|
|
bool parachute_unhealthy # Parachute system missing or unhealthy
|
|
bool traffic_avoidance_unhealthy # Traffic avoidance (ADS-B/FLARM) system missing or unhealthy
|
|
bool remote_id_unhealthy # Remote ID (Open Drone ID) system missing or unhealthy
|
|
bool gnss_lost # Fewer GNSS receivers are healthy than required, or two receivers report inconsistent positions
|