Files
jonasandMathéo Taillandier fe9005fea5 feat(commander): detect fixed-wing propulsion failures from the battery current
The battery current check was removed in #19570, as the total current
cannot tell which multicopter motor failed. In fixed-wing flight the
propulsion draws most of the current, so a battery current below
COM_EF_CURR with the throttle above COM_EF_THROT shows a failed motor,
ESC or propeller without ESC telemetry.

The vehicle executes COM_ACT_FAIL_ACT, as for the ESC-based motor failure
check, and a standard VTOL also triggers the pusher failure quad-chute
once below VT_FW_QC_HMAX, which blocks front transitions. The check is
disabled by default (COM_EF_CURR), needs a current measurement on every
connected battery, and is only built for boards that fly fixed-wing.

Assisted-by: Claude:claude-opus-5-5
Co-authored-by: Mathéo Taillandier <matheo.taillandier@gmail.com>
Signed-off-by: jonas <jonspero@me.com>
2026-11-20 11:31:21 +01:00
..
2026-11-18 14:03:24 +00:00
…
…
…
…
…
…
…

PX4 User Guide

This repo contains the source code for the PX4 User Guide.

Note

Contributions and Translations to this guide are very welcome!