# GNSS heading from a dual-antenna or moving-baseline receiver # # Published by the sensors module from sensor_gnss_relative. Consumed by EKF2 independently from position and velocity. uint64 timestamp # time since system start (microseconds) uint64 timestamp_sample # time since system start (microseconds) - actual measurement time uint32 device_id # unique device ID for the sensor that does not change between power cycles float32 heading # body-frame heading rel to NED from dual antenna array (rad, [-PI, PI]) float32 heading_accuracy # 1-sigma heading accuracy (rad) float32 heading_offset # yaw of the configured antenna baseline in the body frame; heading + heading_offset is the measured baseline heading (rad, [-PI, PI]) float32 baseline_length # antenna baseline length reported by the receiver, NaN if it doesn't report one (m) uint8 jamming_state # jamming_state of the receiver providing the heading, values as in SensorGnss (0: Unknown, 1: OK, 2: Mitigated, 3: Detected) uint8 spoofing_state # spoofing_state of the receiver providing the heading, values as in SensorGnss (0: Unknown, 1: OK, 2: Mitigated, 3: Detected) bool usable # heading may be used: its receiver reports no spoofing or jamming that the enabled checks reject