--- pageClass: is-wide-page --- # SensorGnssRf (UORB message) GNSS RF status. Reports RF block status for a GNSS receiver, decoded from the u-blox UBX-MON-RF message. Includes antenna status/power, jamming/interference indicators, automatic gain control (AGC), noise level, and I/Q demodulation metrics. Published by the `gps` driver (UBX protocol only), once per RF block, via the block-specific topics below. **TOPICS:** sensor_gnss_rf_block0 sensor_gnss_rf_block1 sensor_gnss_rf_block2 ## Fields | Назва | Тип | Unit [Frame] | Range/Enum | Опис | | ------------------------------------------------------------------------------------------------------- | -------- | ---------------------------------------------------------------- | -------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------- | | timestamp | `uint64` | us | | Time since system start | | timestamp_sample | `uint64` | us | | Timestamp of the raw data | | device_id | `uint32` | | | Unique device ID for the sensor that does not change between power cycles | | block_id | `uint8` | | | Only used for multi-topic publishing | | antenna_status | `uint8` | | [ANTENNA_STATUS](#ANTENNA_STATUS) | Status of the antenna supervisor state machine | | antenna_power | `uint8` | | [ANTENNA_POWER](#ANTENNA_POWER) | Antenna power state | | post_status | `uint32` | | | Power-on self-test (POST) status word (vendor-specific bitmask) | | noise_per_ms | `uint16` | | | Noise level as measured by the GNSS receiver core | | automatic_gain_control | `uint16` | | [0 : 8191] | Automatic Gain Control (AGC) monitor value (8191 = 100% of max gain) | | jamming_indicator | `uint8` | | [0 : 255] | Continuous wave (CW) jamming indicator (0 = no CW jamming, 255 = strong CW jamming) | | jamming_state | `uint8` | | [JAMMING_STATE](#JAMMING_STATE) | Jamming state | | i_offset | `int8` | | [-128 : 127] | Imbalance of the I-part of the complex signal (0 = no imbalance) | | i_magnitude | `uint8` | | [0 : 255] | Magnitude of the I-part of the complex signal (0 = no signal, 255 = max magnitude) | | q_offset | `int8` | | [-128 : 127] | Imbalance of the Q-part of the complex signal (0 = no imbalance) | | q_magnitude | `uint8` | | [0 : 255] | Magnitude of the Q-part of the complex signal (0 = no signal, 255 = max magnitude) | | center_frequency | `uint32` | Hz | | Nominal center frequency of the RF block. 0 = unknown. | ## Enums ### ANTENNA_STATUS {#ANTENNA_STATUS} Used in field(s): [antenna_status](#fld_antenna_status) | Назва | Тип | Значення | Опис | | ----------------------------------------------------------------------------------------------------- | ------- | -------- | ---------------------- | | ANTENNA_STATUS_INIT | `uint8` | 0 | Initializing | | ANTENNA_STATUS_UNKNOWN | `uint8` | 1 | Status unknown | | ANTENNA_STATUS_OK | `uint8` | 2 | Antenna OK | | ANTENNA_STATUS_SHORT | `uint8` | 3 | Short circuit detected | | ANTENNA_STATUS_OPEN | `uint8` | 4 | Open circuit detected | ### ANTENNA_POWER {#ANTENNA_POWER} Used in field(s): [antenna_power](#fld_antenna_power) | Назва | Тип | Значення | Опис | | --------------------------------------------------------------------------------------------------- | ------- | -------- | ------------------- | | ANTENNA_POWER_OFF | `uint8` | 0 | Power off | | ANTENNA_POWER_ON | `uint8` | 1 | Power on | | ANTENNA_POWER_UNKNOWN | `uint8` | 2 | Power state unknown | ### JAMMING_STATE {#JAMMING_STATE} Used in field(s): [jamming_state](#fld_jamming_state) | Назва | Тип | Значення | Опис | | ----------------------------------------------------------------------------------------------------- | ------- | -------- | ------------------------------- | | JAMMING_STATE_UNKNOWN | `uint8` | 0 | Unknown | | JAMMING_STATE_OK | `uint8` | 1 | No jamming detected | | JAMMING_STATE_WARNING | `uint8` | 2 | Interference visible but fix OK | | JAMMING_STATE_CRITICAL | `uint8` | 3 | Interference visible and no fix | ## Source Message [Source file (GitHub)](https://github.com/PX4/PX4-Autopilot/blob/main/msg/SensorGnssRf.msg) :::details Click here to see original file ```c # GNSS RF status # # Reports RF block status for a GNSS receiver, decoded from the u-blox UBX-MON-RF message. # Includes antenna status/power, jamming/interference indicators, automatic gain control (AGC), # noise level, and I/Q demodulation metrics. Published by the `gps` driver (UBX protocol only), once # per RF block, via the block-specific topics below. uint64 timestamp # [us] Time since system start uint64 timestamp_sample # [us] Timestamp of the raw data uint32 device_id # Unique device ID for the sensor that does not change between power cycles uint8 block_id # [-] Only used for multi-topic publishing uint8 antenna_status # [@enum ANTENNA_STATUS] Status of the antenna supervisor state machine uint8 ANTENNA_STATUS_INIT = 0 # Initializing uint8 ANTENNA_STATUS_UNKNOWN = 1 # Status unknown uint8 ANTENNA_STATUS_OK = 2 # Antenna OK uint8 ANTENNA_STATUS_SHORT = 3 # Short circuit detected uint8 ANTENNA_STATUS_OPEN = 4 # Open circuit detected uint8 antenna_power # [@enum ANTENNA_POWER] Antenna power state uint8 ANTENNA_POWER_OFF = 0 # Power off uint8 ANTENNA_POWER_ON = 1 # Power on uint8 ANTENNA_POWER_UNKNOWN = 2 # Power state unknown uint32 post_status # [-] Power-on self-test (POST) status word (vendor-specific bitmask) uint16 noise_per_ms # [-] Noise level as measured by the GNSS receiver core uint16 automatic_gain_control # [-] [@range 0, 8191] Automatic Gain Control (AGC) monitor value (8191 = 100% of max gain) uint8 jamming_indicator # [-] [@range 0, 255] Continuous wave (CW) jamming indicator (0 = no CW jamming, 255 = strong CW jamming) uint8 jamming_state # [@enum JAMMING_STATE] Jamming state uint8 JAMMING_STATE_UNKNOWN = 0 # Unknown uint8 JAMMING_STATE_OK = 1 # No jamming detected uint8 JAMMING_STATE_WARNING = 2 # Interference visible but fix OK uint8 JAMMING_STATE_CRITICAL = 3 # Interference visible and no fix int8 i_offset # [-] [@range -128, 127] Imbalance of the I-part of the complex signal (0 = no imbalance) uint8 i_magnitude # [-] [@range 0, 255] Magnitude of the I-part of the complex signal (0 = no signal, 255 = max magnitude) int8 q_offset # [-] [@range -128, 127] Imbalance of the Q-part of the complex signal (0 = no imbalance) uint8 q_magnitude # [-] [@range 0, 255] Magnitude of the Q-part of the complex signal (0 = no signal, 255 = max magnitude) uint32 center_frequency # [Hz] Nominal center frequency of the RF block. 0 = unknown. # One topic per RF block ID # TOPICS sensor_gnss_rf_block0 sensor_gnss_rf_block1 sensor_gnss_rf_block2 ``` :::