# Посилання на модулі: Симуляція :::info **This page is [auto-generated](https://github.com/PX4/PX4-Autopilot/blob/main/Tools/px4moduledoc/markdownout.py) from the source code** using the build command: `make module_documentation`. Do not edit it directly; fix the module documentation in the [PX4-Autopilot](https://github.com/PX4/PX4-Autopilot) source instead. ::: ## simulator_sih Source: [modules/simulation/simulator_sih](https://github.com/PX4/PX4-Autopilot/tree/main/src/modules/simulation/simulator_sih) ### Опис Цей модуль надає симулятор для квадрокоптерів та фіксованих крил, що повністю працює всередині апаратного автопілота. Цей симулятор підписується на "actuator_outputs", які є сигналами ШІМ, наданими модулем розподілу керування. Цей симулятор публікує сигнали датчиків, спотворені реалістичним шумом, щоб включити оцінювання стану в петлю. ### Імплементація Симулятор реалізує рівняння руху за допомогою матричної алгебри.Використовується кватерніонне представлення для орієнтації.Для інтегрування використовується пряма схема Ейлера.Більшість змінних оголошуються глобальними в файлі .hpp, щоб уникнути переповнення стеку. ### Приклади Pose the vehicle on the ground for accel and mag calibration (SITL only), sides named as the calibration names them. With `rotate` it turns about the vertical with a tilt swing, as the mag calibration asks for: ``` simulator_sih orient left rotate ``` Each side in turn: 10 s still, then 10 s rotating, then level. This completes either calibration. ``` simulator_sih orient all ``` Level the vehicle and resume the flight dynamics: ``` simulator_sih orient off ``` ### Usage {#simulator_sih_usage} ``` simulator_sih [arguments...] Commands: start [-t ] Terrain elevation GeoTIFF (DEM), SITL only values: orient Pose the vehicle on the ground for calibration down|up|front|back|left|right|all|off Side facing down, every side in turn, or level [rotate] Rotate about the vertical stop status print status info ```