# 모듈 참조: 시뮬레이션 :::info **This page is [auto-generated](https://github.com/PX4/PX4-Autopilot/blob/main/Tools/px4moduledoc/markdownout.py) from the source code** using the build command: `make module_documentation`. Do not edit it directly; fix the module documentation in the [PX4-Autopilot](https://github.com/PX4/PX4-Autopilot) source instead. ::: ## simulator_sih Source: [modules/simulation/simulator_sih](https://github.com/PX4/PX4-Autopilot/tree/main/src/modules/simulation/simulator_sih) ### 설명 This module provides a simulator for quadrotors and fixed-wings running fully inside the hardware autopilot. This simulator subscribes to "actuator_outputs" which are the actuator pwm signals given by the control allocation module. 이 시뮬레이터는 루프에 상태 추정기를 통합하기 위하여 실제 노이즈로 손상된 센서 신호를 게시합니다. ### 구현 시뮬레이터는 선형대수를 사용하여 운동 방정식을 구현합니다. 쿼터니언 표현은 태도에 사용됩니다. 적분에는 순방향 오일러가 사용됩니다. 대부분의 변수는 스택 오버플로를 피하기 위하여 .hpp 파일에서 전역으로 선언됩니다. ### 예 Pose the vehicle on the ground for accel and mag calibration (SITL only), sides named as the calibration names them. With `rotate` it turns about the vertical with a tilt swing, as the mag calibration asks for: ``` simulator_sih orient left rotate ``` Each side in turn: 10 s still, then 10 s rotating, then level. This completes either calibration. ``` simulator_sih orient all ``` Level the vehicle and resume the flight dynamics: ``` simulator_sih orient off ``` ### Usage {#simulator_sih_usage} ``` simulator_sih [arguments...] Commands: start [-t ] Terrain elevation GeoTIFF (DEM), SITL only values: orient Pose the vehicle on the ground for calibration down|up|front|back|left|right|all|off Side facing down, every side in turn, or level [rotate] Rotate about the vertical stop status print status info ```