# Wheel encoder readings # # Angular speed, unwrapped angle and raw encoder counts for up to four wheels. # Published by the Roboclaw driver (one instance per controller, two encoder channels each) # and by the Gazebo bridge in simulation. # Streamed to MAVLink as WHEEL_DISTANCE, logged, and exported over uXRCE-DDS. # # Wheel order follows the PX4 motor index: entry i is the wheel driven by Motor(i+1) in the # rover's actuator configuration. # - Mecanum: 0 = front right, 1 = front left, 2 = rear right, 3 = rear left # - Differential: 0 = right, 1 = left (2 and 3 unused) # - Ackermann: 0 = drivetrain (motor or drive shaft, reported as wheel rotation), 1-3 unused # # Unused entries have counts_per_rev = 0. # # The WHEEL_DISTANCE stream supports a single publisher: with several instances (e.g. two Roboclaw # controllers) they all fill the same slots and only the most recently updated instance is streamed. uint64 timestamp # [us] Time since system start float32[4] wheel_speed # [rad/s] Wheel angular speed. Positive is forward rotation. float32[4] wheel_angle # [rad] Unwrapped wheel angle since boot, 2 * pi * encoder_counts / counts_per_rev uint32[4] counts_per_rev # [-] Encoder counts per wheel revolution int64[4] encoder_counts # [-] Wheel position in encoder counts since boot. Positive is forward rotation; negative is reverse rotation.