---
pageClass: is-wide-page
---
# SurfaceVehicleCourseSetpoint (UORB message)
Surface Vehicle Course Setpoint.
Course setpoint for surface vehicles, on land or on water (rovers, boats).
Consumed by the position controllers of rover_ackermann, rover_differential and
rover_mecanum, which turn it into speed and attitude setpoints.
Published by the Guided Course mode of rover_ackermann, rover_differential and rover_mecanum,
and can be sent from ROS 2 over uXRCE-DDS (/fmu/in/surface_vehicle_course_setpoint).
The vehicle tries to track the course over ground, as with the fixed-wing course hold: vehicles
that steer by heading correct their heading by the estimated drift angle; omnidirectional vehicles drive
along the course setpoint directly. There is no desired track, so a sideways offset is not
corrected. To follow a desired track, publish surface_vehicle_position_setpoint instead.
The position controller follows whichever of the two was published most recently.
**TOPICS:** surface_vehicle_course_setpoint
## Fields
| 参数名 | 类型 | Unit [Frame] | Range/Enum | 描述 |
| ----------------------------------- | --------- | ---------------------------------------------------------------- | -------------------------------------------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| timestamp | `uint64` | us | | Time since system start |
| course | `float32` | rad [NED] | [-pi : pi] | Course over ground to hold (Invalid: NaN No course; the position controller stays idle) |
| speed | `float32` | 米/秒 | [-inf : inf] | Cruising speed; a negative value drives the vehicle in reverse (rear first) along the course (Invalid: NaN Defaults to maximum speed) |
| yaw | `float32` | rad [NED] | [-pi : pi] | Currently unused. Only for omnidirectional vehicles: vehicle yaw while holding the course. (Invalid: NaN Not considered) |
## Source Message
[Source file (GitHub)](https://github.com/PX4/PX4-Autopilot/blob/main/msg/SurfaceVehicleCourseSetpoint.msg)
:::details
Click here to see original file
```c
# Surface Vehicle Course Setpoint
#
# Course setpoint for surface vehicles, on land or on water (rovers, boats).
# Consumed by the position controllers of rover_ackermann, rover_differential and
# rover_mecanum, which turn it into speed and attitude setpoints.
# Published by the Guided Course mode of rover_ackermann, rover_differential and rover_mecanum,
# and can be sent from ROS 2 over uXRCE-DDS (/fmu/in/surface_vehicle_course_setpoint).
# The vehicle tries to track the course over ground, as with the fixed-wing course hold: vehicles
# that steer by heading correct their heading by the estimated drift angle; omnidirectional vehicles drive
# along the course setpoint directly. There is no desired track, so a sideways offset is not
# corrected. To follow a desired track, publish surface_vehicle_position_setpoint instead.
# The position controller follows whichever of the two was published most recently.
uint64 timestamp # [us] Time since system start
float32 course # [rad] [@range -pi, pi] [@frame NED] [@invalid NaN No course; the position controller stays idle] Course over ground to hold
float32 speed # [m/s] [@range -inf, inf] [@invalid NaN Defaults to maximum speed] Cruising speed; a negative value drives the vehicle in reverse (rear first) along the course
float32 yaw # [rad] [@range -pi, pi] [@frame NED] [@invalid NaN Not considered] Currently unused. Only for omnidirectional vehicles: vehicle yaw while holding the course.
```
:::