--- pageClass: is-wide-page --- # WheelEncoders (UORB message) Wheel encoder readings. Angular speed, unwrapped angle and raw encoder counts for up to four wheels. Published by the Roboclaw driver (one instance per controller, two encoder channels each) and by the Gazebo bridge in simulation. Streamed to MAVLink as WHEEL_DISTANCE, logged, and exported over uXRCE-DDS. Wheel order follows the PX4 motor index: entry i is the wheel driven by Motor(i+1) in the rover's actuator configuration. - Mecanum: 0 = front right, 1 = front left, 2 = rear right, 3 = rear left - Differential: 0 = right, 1 = left (2 and 3 unused) - Ackermann: 0 = drivetrain (motor or drive shaft, reported as wheel rotation), 1-3 unused Unused entries have counts_per_rev = 0. The WHEEL_DISTANCE stream supports a single publisher: with several instances (e.g. two Roboclaw controllers) they all fill the same slots and only the most recently updated instance is streamed. **TOPICS:** wheel_encoders ## Fields | 명칭 | 형식 | Unit [Frame] | Range/Enum | 설명 | | --------------------------------------------------------------------------------------- | ------------ | ---------------------------------------------------------------- | ---------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | | timestamp | `uint64` | us | | Time since system start | | wheel_speed | `float32[4]` | rad/s | | Wheel angular speed. Positive is forward rotation. | | wheel_angle | `float32[4]` | rad | | Unwrapped wheel angle since boot, 2 _ pi _ encoder_counts / counts_per_rev | | counts_per_rev | `uint32[4]` | | | Encoder counts per wheel revolution | | encoder_counts | `int64[4]` | | | Wheel position in encoder counts since boot. Positive is forward rotation; negative is reverse rotation. | ## Source Message [Source file (GitHub)](https://github.com/PX4/PX4-Autopilot/blob/main/msg/WheelEncoders.msg) :::details Click here to see original file ```c # Wheel encoder readings # # Angular speed, unwrapped angle and raw encoder counts for up to four wheels. # Published by the Roboclaw driver (one instance per controller, two encoder channels each) # and by the Gazebo bridge in simulation. # Streamed to MAVLink as WHEEL_DISTANCE, logged, and exported over uXRCE-DDS. # # Wheel order follows the PX4 motor index: entry i is the wheel driven by Motor(i+1) in the # rover's actuator configuration. # - Mecanum: 0 = front right, 1 = front left, 2 = rear right, 3 = rear left # - Differential: 0 = right, 1 = left (2 and 3 unused) # - Ackermann: 0 = drivetrain (motor or drive shaft, reported as wheel rotation), 1-3 unused # # Unused entries have counts_per_rev = 0. # # The WHEEL_DISTANCE stream supports a single publisher: with several instances (e.g. two Roboclaw # controllers) they all fill the same slots and only the most recently updated instance is streamed. uint64 timestamp # [us] Time since system start float32[4] wheel_speed # [rad/s] Wheel angular speed. Positive is forward rotation. float32[4] wheel_angle # [rad] Unwrapped wheel angle since boot, 2 * pi * encoder_counts / counts_per_rev uint32[4] counts_per_rev # [-] Encoder counts per wheel revolution int64[4] encoder_counts # [-] Wheel position in encoder counts since boot. Positive is forward rotation; negative is reverse rotation. ``` :::