---
pageClass: is-wide-page
---
# SensorGnssRf (UORB message)
GNSS RF status.
Reports RF block status for a GNSS receiver, decoded from the u-blox UBX-MON-RF message.
Includes antenna status/power, jamming/interference indicators, automatic gain control (AGC),
noise level, and I/Q demodulation metrics. Published by the `gps` driver (UBX protocol only), once
per RF block, via the block-specific topics below.
**TOPICS:** sensor_gnss_rf_block0 sensor_gnss_rf_block1 sensor_gnss_rf_block2
## Fields
| 명칭 | 형식 | Unit [Frame] | Range/Enum | 설명 |
| ------------------------------------------------------------------------------------------------------- | -------- | ---------------------------------------------------------------- | -------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------- |
| timestamp | `uint64` | us | | Time since system start |
| timestamp_sample | `uint64` | us | | Timestamp of the raw data |
| device_id | `uint32` | | | Unique device ID for the sensor that does not change between power cycles |
| block_id | `uint8` | | | Only used for multi-topic publishing |
| antenna_status | `uint8` | | [ANTENNA_STATUS](#ANTENNA_STATUS) | Status of the antenna supervisor state machine |
| antenna_power | `uint8` | | [ANTENNA_POWER](#ANTENNA_POWER) | Antenna power state |
| post_status | `uint32` | | | Power-on self-test (POST) status word (vendor-specific bitmask) |
| noise_per_ms | `uint16` | | | Noise level as measured by the GNSS receiver core |
| automatic_gain_control | `uint16` | | [0 : 8191] | Automatic Gain Control (AGC) monitor value (8191 = 100% of max gain) |
| jamming_indicator | `uint8` | | [0 : 255] | Continuous wave (CW) jamming indicator (0 = no CW jamming, 255 = strong CW jamming) |
| jamming_state | `uint8` | | [JAMMING_STATE](#JAMMING_STATE) | Jamming state |
| i_offset | `int8` | | [-128 : 127] | Imbalance of the I-part of the complex signal (0 = no imbalance) |
| i_magnitude | `uint8` | | [0 : 255] | Magnitude of the I-part of the complex signal (0 = no signal, 255 = max magnitude) |
| q_offset | `int8` | | [-128 : 127] | Imbalance of the Q-part of the complex signal (0 = no imbalance) |
| q_magnitude | `uint8` | | [0 : 255] | Magnitude of the Q-part of the complex signal (0 = no signal, 255 = max magnitude) |
| center_frequency | `uint32` | Hz | | Nominal center frequency of the RF block. 0 = unknown. |
## Enums
### ANTENNA_STATUS {#ANTENNA_STATUS}
Used in field(s): [antenna_status](#fld_antenna_status)
| 명칭 | 형식 | Value | 설명 |
| ----------------------------------------------------------------------------------------------------- | ------- | ----- | ---------------------- |
| ANTENNA_STATUS_INIT | `uint8` | 0 | Initializing |
| ANTENNA_STATUS_UNKNOWN | `uint8` | 1 | Status unknown |
| ANTENNA_STATUS_OK | `uint8` | 2 | Antenna OK |
| ANTENNA_STATUS_SHORT | `uint8` | 3 | Short circuit detected |
| ANTENNA_STATUS_OPEN | `uint8` | 4 | Open circuit detected |
### ANTENNA_POWER {#ANTENNA_POWER}
Used in field(s): [antenna_power](#fld_antenna_power)
| 명칭 | 형식 | Value | 설명 |
| --------------------------------------------------------------------------------------------------- | ------- | ----- | ------------------- |
| ANTENNA_POWER_OFF | `uint8` | 0 | Power off |
| ANTENNA_POWER_ON | `uint8` | 1 | Power on |
| ANTENNA_POWER_UNKNOWN | `uint8` | 2 | Power state unknown |
### JAMMING_STATE {#JAMMING_STATE}
Used in field(s): [jamming_state](#fld_jamming_state)
| 명칭 | 형식 | Value | 설명 |
| ----------------------------------------------------------------------------------------------------- | ------- | ----- | ------------------------------- |
| JAMMING_STATE_UNKNOWN | `uint8` | 0 | Unknown |
| JAMMING_STATE_OK | `uint8` | 1 | No jamming detected |
| JAMMING_STATE_WARNING | `uint8` | 2 | Interference visible but fix OK |
| JAMMING_STATE_CRITICAL | `uint8` | 3 | Interference visible and no fix |
## Source Message
[Source file (GitHub)](https://github.com/PX4/PX4-Autopilot/blob/main/msg/SensorGnssRf.msg)
:::details
Click here to see original file
```c
# GNSS RF status
#
# Reports RF block status for a GNSS receiver, decoded from the u-blox UBX-MON-RF message.
# Includes antenna status/power, jamming/interference indicators, automatic gain control (AGC),
# noise level, and I/Q demodulation metrics. Published by the `gps` driver (UBX protocol only), once
# per RF block, via the block-specific topics below.
uint64 timestamp # [us] Time since system start
uint64 timestamp_sample # [us] Timestamp of the raw data
uint32 device_id # Unique device ID for the sensor that does not change between power cycles
uint8 block_id # [-] Only used for multi-topic publishing
uint8 antenna_status # [@enum ANTENNA_STATUS] Status of the antenna supervisor state machine
uint8 ANTENNA_STATUS_INIT = 0 # Initializing
uint8 ANTENNA_STATUS_UNKNOWN = 1 # Status unknown
uint8 ANTENNA_STATUS_OK = 2 # Antenna OK
uint8 ANTENNA_STATUS_SHORT = 3 # Short circuit detected
uint8 ANTENNA_STATUS_OPEN = 4 # Open circuit detected
uint8 antenna_power # [@enum ANTENNA_POWER] Antenna power state
uint8 ANTENNA_POWER_OFF = 0 # Power off
uint8 ANTENNA_POWER_ON = 1 # Power on
uint8 ANTENNA_POWER_UNKNOWN = 2 # Power state unknown
uint32 post_status # [-] Power-on self-test (POST) status word (vendor-specific bitmask)
uint16 noise_per_ms # [-] Noise level as measured by the GNSS receiver core
uint16 automatic_gain_control # [-] [@range 0, 8191] Automatic Gain Control (AGC) monitor value (8191 = 100% of max gain)
uint8 jamming_indicator # [-] [@range 0, 255] Continuous wave (CW) jamming indicator (0 = no CW jamming, 255 = strong CW jamming)
uint8 jamming_state # [@enum JAMMING_STATE] Jamming state
uint8 JAMMING_STATE_UNKNOWN = 0 # Unknown
uint8 JAMMING_STATE_OK = 1 # No jamming detected
uint8 JAMMING_STATE_WARNING = 2 # Interference visible but fix OK
uint8 JAMMING_STATE_CRITICAL = 3 # Interference visible and no fix
int8 i_offset # [-] [@range -128, 127] Imbalance of the I-part of the complex signal (0 = no imbalance)
uint8 i_magnitude # [-] [@range 0, 255] Magnitude of the I-part of the complex signal (0 = no signal, 255 = max magnitude)
int8 q_offset # [-] [@range -128, 127] Imbalance of the Q-part of the complex signal (0 = no imbalance)
uint8 q_magnitude # [-] [@range 0, 255] Magnitude of the Q-part of the complex signal (0 = no signal, 255 = max magnitude)
uint32 center_frequency # [Hz] Nominal center frequency of the RF block. 0 = unknown.
# One topic per RF block ID
# TOPICS sensor_gnss_rf_block0 sensor_gnss_rf_block1 sensor_gnss_rf_block2
```
:::