--- pageClass: is-wide-page --- # PrecTakeoffStatus (UORB message) Precision takeoff status. Published by: navigator (prec_takeoff.cpp). Subscribed by: vision_target_estimator, flight_mode_manager (FlightTaskAuto). ONGOING while a vertical takeoff setpoint is active and MIS_TKO_PREC is set. DONE is published when the takeoff altitude is reached, then STOPPED once the takeoff is no longer active. Published every Navigator cycle. **TOPICS:** prec_takeoff_status ## Fields | 명칭 | 형식 | Unit [Frame] | Range/Enum | 설명 | | ------------------------------------------------------------------------ | -------- | ---------------------------------------------------------------- | ----------------------------------------------------------------------------------- | ---------------------------------------------------------- | | timestamp | `uint64` | us | | Time since system start | | state | `uint8` | | [PREC_TAKEOFF_STATE](#PREC_TAKEOFF_STATE) | Current precision-takeoff state | | setpoint_adjusted | `bool` | | | True after a valid target adjusted the horizontal setpoint | ## Enums ### PREC_TAKEOFF_STATE {#PREC_TAKEOFF_STATE} Used in field(s): [state](#fld_state) | 명칭 | 형식 | Value | 설명 | | ---------------------------------------------------------------------------------------------------------------------------------- | ------- | ----- | --------------------------------------------------------------- | | PREC_TAKEOFF_STATE_STOPPED | `uint8` | 0 | Not active | | PREC_TAKEOFF_STATE_ONGOING | `uint8` | 1 | Takeoff active; the estimator may still be acquiring the target | | PREC_TAKEOFF_STATE_DONE | `uint8` | 2 | Takeoff altitude reached | ## Source Message [Source file (GitHub)](https://github.com/PX4/PX4-Autopilot/blob/main/msg/PrecTakeoffStatus.msg) :::details Click here to see original file ```c # Precision takeoff status. # # Published by: navigator (prec_takeoff.cpp). # Subscribed by: vision_target_estimator, flight_mode_manager (FlightTaskAuto). # # ONGOING while a vertical takeoff setpoint is active and MIS_TKO_PREC is set. DONE is published when the # takeoff altitude is reached, then STOPPED once the takeoff is no longer active. Published every Navigator cycle. uint64 timestamp # [us] Time since system start uint8 state # [@enum PREC_TAKEOFF_STATE] Current precision-takeoff state bool setpoint_adjusted # True after a valid target adjusted the horizontal setpoint uint8 PREC_TAKEOFF_STATE_STOPPED = 0 # Not active uint8 PREC_TAKEOFF_STATE_ONGOING = 1 # Takeoff active; the estimator may still be acquiring the target uint8 PREC_TAKEOFF_STATE_DONE = 2 # Takeoff altitude reached ``` :::