# Internal combustion engine (ICE) actuator setpoints # # Published by the internal_combustion_engine_control module, which runs the engine # start/stop state machine and the idle RPM governor. # The mixer maps these setpoints onto the IC Engine output functions (ignition, # throttle, choke, starter), which are assigned to the flight controller outputs. # The resulting state machine state is reported in InternalCombustionEngineStatus. uint64 timestamp # [us] Time since system start bool ignition_on # Activate/deactivate the ignition (spark plug) float32 throttle_control # [norm] [@range 0, 1] [@invalid NaN Stops the engine, output goes to its disarmed value] Throttle actuator setpoint, rate limited by ICE_THR_SLEW. 0 is closed throttle float32 choke_control # [norm] [@range 0, 1] Choke actuator setpoint, 1 is fully closed float32 starter_engine_control # [norm] [@range 0, 1] (Electric) starter motor setpoint bool user_request_motor_on # User intent for the engine to be running, from the source selected by ICE_ON_SOURCE