# Test MC_01 - Manual Modes

## Objective

To test that manual flight modes work as expected

## Preflight

Ensure that the drone can go into Stabilized, Altitude, Position mode while still on the ground

## Flight Tests

❏ Stabilized

    ❏ Pitch/Roll/Yaw response 1:1

    ❏ Throttle response 1:1

❏ Altitude

    ❏ Vertical position should hold current value with stick centered

    ❏ Pitch/Roll/Yaw response 1:1

    ❏ Throttle response set to Climbs/Descend rate

❏ Position

    ❏ Horizontal position should hold current value with stick centered

    ❏ Vertical position should hold current value with stick centered

    ❏ Throttle response set to Climbs/Descend rate

    ❏ Pitch/Roll/Yaw response set to Pitch/Roll/Yaw rates

❏ Landing

    ❏ Land in Position mode with the throttle below 40%

    ❏ Upon touching ground, copter should disarm automatically within 2 seconds (disarm time set by parameter: [COM_DISARM_LAND](../advanced_config/parameter_reference.md#COM_DISARM_LAND))

## Expected Results

- Take-off should be smooth as throttle is raised
- No oscillations should present in any of the above flight modes
- Upon landing, copter should not bounce on the ground