# Surface Vehicle Speed Status # # Status of the speed controller of surface vehicles, on land or on water (rovers, boats). # Published by the speed controllers of rover_ackermann, rover_differential and rover_mecanum # while they track surface_vehicle_speed_setpoint, for logging and tuning. # Not consumed by other modules. uint64 timestamp # [us] Time since system start float32 measured_speed_body_x # [m/s] [@range -inf (Backwards), inf (Forwards)] [@frame Body] Measured speed along the body X axis float32 adjusted_speed_body_x_setpoint # [m/s] [@range -inf (Backwards), inf (Forwards)] [@frame Body] Speed setpoint along the body X axis that is being tracked (Applied slew rates) float32 pid_thrust_body_x_integral # [-] [@range -1, 1] Integral of the PID for the closed loop controller of the speed along the body X axis float32 measured_speed_body_y # [m/s] [@range -inf (Left), inf (Right)] [@frame Body] [@invalid NaN If not omnidirectional] Omnidirectional vehicles only: Measured speed along the body Y axis float32 adjusted_speed_body_y_setpoint # [m/s] [@range -inf (Left), inf (Right)] [@frame Body] [@invalid NaN If not omnidirectional] Omnidirectional vehicles only: Speed setpoint along the body Y axis that is being tracked (Applied slew rates) float32 pid_thrust_body_y_integral # [-] [@range -1, 1] [@invalid NaN If not omnidirectional] Omnidirectional vehicles only: Integral of the PID for the closed loop controller of the speed along the body Y axis