diff --git a/.vscode/cmake-variants.yaml b/.vscode/cmake-variants.yaml index 71aec979d4..4b2c95eb34 100644 --- a/.vscode/cmake-variants.yaml +++ b/.vscode/cmake-variants.yaml @@ -531,3 +531,13 @@ CONFIG: buildType: MinSizeRel settings: CONFIG: svehicle_e2_default + x-mav_ap-h743r1_bootloader: + short: x-mav_ap-h743r1-boot + buildType: MinSizeRel + settings: + CONFIG: x-mav_ap-h743r1_bootloader + x-mav_ap-h743r1_default: + short: x-mav_ap-h743r1 + buildType: MinSizeRel + settings: + CONFIG: x-mav_ap-h743r1_default diff --git a/boards/x-mav/ap-h743r1/CMakeLists.txt b/boards/x-mav/ap-h743r1/CMakeLists.txt new file mode 100644 index 0000000000..8756f63e64 --- /dev/null +++ b/boards/x-mav/ap-h743r1/CMakeLists.txt @@ -0,0 +1,34 @@ +############################################################################ +# +# Copyright (c) 2025 PX4 Development Team. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name PX4 nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +add_subdirectory(pwm_voltage) diff --git a/boards/x-mav/ap-h743r1/bootloader.px4board b/boards/x-mav/ap-h743r1/bootloader.px4board new file mode 100644 index 0000000000..cc68214fa3 --- /dev/null +++ b/boards/x-mav/ap-h743r1/bootloader.px4board @@ -0,0 +1,4 @@ +CONFIG_BOARD_TOOLCHAIN="arm-none-eabi" +CONFIG_BOARD_ARCHITECTURE="cortex-m7" +CONFIG_BOARD_ROMFSROOT="" +CONFIG_ARCH_CHIP_STM32H7=y diff --git a/boards/x-mav/ap-h743r1/default.px4board b/boards/x-mav/ap-h743r1/default.px4board new file mode 100644 index 0000000000..a4c0f62d2d --- /dev/null +++ b/boards/x-mav/ap-h743r1/default.px4board @@ -0,0 +1,92 @@ +CONFIG_BOARD_TOOLCHAIN="arm-none-eabi" +CONFIG_BOARD_ARCHITECTURE="cortex-m7" +CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS0" +CONFIG_BOARD_SERIAL_GPS2="/dev/ttyS1" +CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS2" +CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS3" +CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS5" +CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS6" +CONFIG_DRIVERS_ADC_BOARD_ADC=y +CONFIG_DRIVERS_BAROMETER_DPS310=y +CONFIG_DRIVERS_BAROMETER_GOERTEK_SPL06=y +CONFIG_DRIVERS_CAMERA_CAPTURE=y +CONFIG_DRIVERS_CAMERA_TRIGGER=y +CONFIG_DRIVERS_CDCACM_AUTOSTART=y +CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y +CONFIG_DRIVERS_DISTANCE_SENSOR_TF02PRO=y +CONFIG_DRIVERS_DISTANCE_SENSOR_TFMINI=y +CONFIG_DRIVERS_DSHOT=y +CONFIG_DRIVERS_GPS=y +CONFIG_DRIVERS_IMU_BOSCH_BMI270=y +CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y +CONFIG_DRIVERS_MAGNETOMETER_ISENTEK_IST8310=y +CONFIG_DRIVERS_MAGNETOMETER_QMC5883L=y +CONFIG_COMMON_OPTICAL_FLOW=y +CONFIG_COMMON_OSD=y +CONFIG_DRIVERS_PWM_OUT=y +CONFIG_DRIVERS_PX4IO=y +CONFIG_COMMON_RC=y +CONFIG_COMMON_TELEMETRY=y +CONFIG_DRIVERS_TONE_ALARM=y +CONFIG_DRIVERS_UAVCAN=y +CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=4 +CONFIG_MODULES_BATTERY_STATUS=y +CONFIG_MODULES_CAMERA_FEEDBACK=y +CONFIG_MODULES_COMMANDER=y +CONFIG_MODULES_CONTROL_ALLOCATOR=y +CONFIG_MODULES_DATAMAN=y +CONFIG_MODULES_EKF2=y +CONFIG_MODULES_EVENTS=y +CONFIG_MODULES_FLIGHT_MODE_MANAGER=y +CONFIG_MODULES_FW_ATT_CONTROL=y +CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y +CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y +CONFIG_MODULES_FW_MODE_MANAGER=y +CONFIG_MODULES_FW_RATE_CONTROL=y +CONFIG_MODULES_GIMBAL=y +CONFIG_MODULES_GYRO_CALIBRATION=y +CONFIG_MODULES_GYRO_FFT=y +CONFIG_MODULES_LAND_DETECTOR=y +CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y +CONFIG_MODULES_LOAD_MON=y +CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=y +CONFIG_MODULES_LOGGER=y +CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y +CONFIG_MODULES_MANUAL_CONTROL=y +CONFIG_MODULES_MAVLINK=y +CONFIG_MODULES_MC_ATT_CONTROL=y +CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y +CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y +CONFIG_MODULES_MC_POS_CONTROL=y +CONFIG_MODULES_MC_RATE_CONTROL=y +CONFIG_MODULES_NAVIGATOR=y +CONFIG_MODULES_RC_UPDATE=y +CONFIG_MODULES_SENSORS=y +CONFIG_MODULES_TEMPERATURE_COMPENSATION=y +CONFIG_MODULES_VTOL_ATT_CONTROL=y +CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y +CONFIG_SYSTEMCMDS_BL_UPDATE=y +CONFIG_SYSTEMCMDS_DMESG=y +CONFIG_SYSTEMCMDS_DUMPFILE=y +CONFIG_SYSTEMCMDS_GPIO=y +CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y +CONFIG_SYSTEMCMDS_I2CDETECT=y +CONFIG_SYSTEMCMDS_LED_CONTROL=y +CONFIG_SYSTEMCMDS_MFT=y +CONFIG_SYSTEMCMDS_MTD=y +CONFIG_SYSTEMCMDS_NSHTERM=y +CONFIG_SYSTEMCMDS_PARAM=y +CONFIG_SYSTEMCMDS_PERF=y +CONFIG_SYSTEMCMDS_REBOOT=y +CONFIG_SYSTEMCMDS_SD_BENCH=y +CONFIG_SYSTEMCMDS_SD_STRESS=y +CONFIG_SYSTEMCMDS_SYSTEM_TIME=y +CONFIG_SYSTEMCMDS_TOP=y +CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y +CONFIG_SYSTEMCMDS_TUNE_CONTROL=y +CONFIG_SYSTEMCMDS_UORB=y +CONFIG_SYSTEMCMDS_USB_CONNECTED=y +CONFIG_SYSTEMCMDS_VER=y +CONFIG_SYSTEMCMDS_WORK_QUEUE=y +CONFIG_EXAMPLES_FAKE_GPS=y +CONFIG_ARCH_CHIP_STM32H7=y diff --git a/boards/x-mav/ap-h743r1/extras/px4_io-v2_default.bin b/boards/x-mav/ap-h743r1/extras/px4_io-v2_default.bin new file mode 100644 index 0000000000..145089ae0d Binary files /dev/null and b/boards/x-mav/ap-h743r1/extras/px4_io-v2_default.bin differ diff --git a/boards/x-mav/ap-h743r1/extras/x-mav_ap-h743r1_bootloader.bin b/boards/x-mav/ap-h743r1/extras/x-mav_ap-h743r1_bootloader.bin new file mode 100755 index 0000000000..0082f4f805 Binary files /dev/null and b/boards/x-mav/ap-h743r1/extras/x-mav_ap-h743r1_bootloader.bin differ diff --git a/boards/x-mav/ap-h743r1/firmware.prototype b/boards/x-mav/ap-h743r1/firmware.prototype new file mode 100644 index 0000000000..81aeb5622b --- /dev/null +++ b/boards/x-mav/ap-h743r1/firmware.prototype @@ -0,0 +1,13 @@ +{ + "board_id": 1203, + "magic": "PX4FWv1", + "description": "Firmware for the AP-H743r1 board", + "image": "", + "build_time": 0, + "summary": "AP-H743r1", + "version": "0.1", + "image_size": 0, + "image_maxsize": 1966080, + "git_identity": "", + "board_revision": 0 +} diff --git a/boards/x-mav/ap-h743r1/init/rc.board_defaults b/boards/x-mav/ap-h743r1/init/rc.board_defaults new file mode 100644 index 0000000000..af3cd672e1 --- /dev/null +++ b/boards/x-mav/ap-h743r1/init/rc.board_defaults @@ -0,0 +1,29 @@ +#!/bin/sh +# +# board specific defaults +#------------------------------------------------------------------------------ +param set-default BAT1_A_PER_V 17 +param set-default BAT1_N_CELLS 4 +param set-default BAT1_V_CHARGED 4.2 +param set-default BAT1_V_DIV 10.1 +param set-default BAT1_V_EMPTY 3.2 + +param set-default SYS_HAS_MAG 1 +param set-default PWM_MAIN_TIM0 -4 +param set-default RC_INPUT_PROTO -1 + +param set-default IMU_GYRO_RATEMAX 2000 +param set-default SYS_AUTOSTART 4001 +param set-default MC_PITCHRATE_K 0.4 +param set-default MC_ROLLRATE_K 0.35 +param set-default MC_YAWRATE_K 1.2 +param set-default MC_YAWRATE_MAX 360 +param set-default MAV_TYPE 2 +param set-default CA_AIRFRAME 0 +param set-default CA_ROTOR_COUNT 4 +param set-default CBRK_SUPPLY_CHK 894281 + +param set-default USB_MAV_MODE 5 + +# pwm voltage 3.3V/5V switch +pwm_voltage_apply start diff --git a/boards/x-mav/ap-h743r1/init/rc.board_extras b/boards/x-mav/ap-h743r1/init/rc.board_extras new file mode 100644 index 0000000000..cccb4ed416 --- /dev/null +++ b/boards/x-mav/ap-h743r1/init/rc.board_extras @@ -0,0 +1,4 @@ +#!/bin/sh +# +# board specific extras init +#------------------------------------------------------------------------------ diff --git a/boards/x-mav/ap-h743r1/init/rc.board_sensors b/boards/x-mav/ap-h743r1/init/rc.board_sensors new file mode 100644 index 0000000000..fbc41fa1cb --- /dev/null +++ b/boards/x-mav/ap-h743r1/init/rc.board_sensors @@ -0,0 +1,26 @@ +#!/bin/sh +# +# board specific sensors init +#------------------------------------------------------------------------------ + +board_adc start + +# IMU +if ! icm42688p -s -b 1 -R 4 start +then + bmi270 -s -b 1 -R 4 start +fi + +if ! icm42688p -s -b 4 -R 4 start +then + bmi270 -s -b 4 -R 4 start +fi + +# baro +if ! dps310 -I start -a 0x76 +then + spl06 -I start -a 0x76 +fi + +# internal mag +ist8310 -I -R 6 start diff --git a/boards/x-mav/ap-h743r1/nuttx-config/Kconfig b/boards/x-mav/ap-h743r1/nuttx-config/Kconfig new file mode 100644 index 0000000000..bb33d3cfda --- /dev/null +++ b/boards/x-mav/ap-h743r1/nuttx-config/Kconfig @@ -0,0 +1,17 @@ +# +# For a description of the syntax of this configuration file, +# see misc/tools/kconfig-language.txt. +# +config BOARD_HAS_PROBES + bool "Board provides GPIO or other Hardware for signaling to timing analyze." + default y + ---help--- + This board provides GPIO FMU-CH1-5, CAP1-6 as PROBE_1-11 to provide timing signals from selected drivers. + +config BOARD_USE_PROBES + bool "Enable the use the board provided FMU-CH1-5, CAP1-6 as PROBE_1-11" + default n + depends on BOARD_HAS_PROBES + + ---help--- + Select to use GPIO FMU-CH1-5, CAP1-6 to provide timing signals from selected drivers. diff --git a/boards/x-mav/ap-h743r1/nuttx-config/bootloader/defconfig b/boards/x-mav/ap-h743r1/nuttx-config/bootloader/defconfig new file mode 100644 index 0000000000..b4128c5932 --- /dev/null +++ b/boards/x-mav/ap-h743r1/nuttx-config/bootloader/defconfig @@ -0,0 +1,90 @@ +# +# This file is autogenerated: PLEASE DO NOT EDIT IT. +# +# You can use "make menuconfig" to make any modifications to the installed .config file. +# You can then do "make savedefconfig" to generate a new defconfig file that includes your +# modifications. +# +# CONFIG_DEV_CONSOLE is not set +# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set +# CONFIG_SPI_EXCHANGE is not set +# CONFIG_STM32H7_SYSCFG is not set +CONFIG_ARCH="arm" +CONFIG_ARCH_BOARD_CUSTOM=y +CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/x-mav/ap-h743r1/nuttx-config" +CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y +CONFIG_ARCH_BOARD_CUSTOM_NAME="px4" +CONFIG_ARCH_CHIP="stm32h7" +CONFIG_ARCH_CHIP_STM32H743VI=y +CONFIG_ARCH_CHIP_STM32H7=y +CONFIG_ARCH_INTERRUPTSTACK=768 +CONFIG_ARMV7M_BASEPRI_WAR=y +CONFIG_ARMV7M_ICACHE=y +CONFIG_ARMV7M_MEMCPY=y +CONFIG_ARMV7M_USEBASEPRI=y +CONFIG_BOARDCTL=y +CONFIG_BOARDCTL_RESET=y +CONFIG_BOARD_ASSERT_RESET_VALUE=0 +CONFIG_BOARD_INITTHREAD_PRIORITY=254 +CONFIG_BOARD_LATE_INITIALIZE=y +CONFIG_BOARD_LOOPSPERMSEC=95150 +CONFIG_BOARD_RESET_ON_ASSERT=2 +CONFIG_CDCACM=y +CONFIG_CDCACM_IFLOWCONTROL=y +CONFIG_CDCACM_PRODUCTID=0x0036 +CONFIG_CDCACM_PRODUCTSTR="X-MAV AP-H743r1 Bootloader" +CONFIG_CDCACM_RXBUFSIZE=600 +CONFIG_CDCACM_TXBUFSIZE=12000 +CONFIG_CDCACM_VENDORID=0x1B8C +CONFIG_CDCACM_VENDORSTR="X-MAV" +CONFIG_DEBUG_FULLOPT=y +CONFIG_DEBUG_SYMBOLS=y +CONFIG_DEBUG_TCBINFO=y +CONFIG_DEFAULT_SMALL=y +CONFIG_EXPERIMENTAL=y +CONFIG_FDCLONE_DISABLE=y +CONFIG_FDCLONE_STDIO=y +CONFIG_HAVE_CXX=y +CONFIG_HAVE_CXXINITIALIZE=y +CONFIG_IDLETHREAD_STACKSIZE=750 +CONFIG_INIT_ENTRYPOINT="bootloader_main" +CONFIG_INIT_STACKSIZE=3194 +CONFIG_LIBC_FLOATINGPOINT=y +CONFIG_LIBC_LONG_LONG=y +CONFIG_LIBC_STRERROR=y +CONFIG_MEMSET_64BIT=y +CONFIG_MEMSET_OPTSPEED=y +CONFIG_PREALLOC_TIMERS=50 +CONFIG_PTHREAD_STACK_MIN=512 +CONFIG_RAM_SIZE=245760 +CONFIG_RAM_START=0x20010000 +CONFIG_RAW_BINARY=y +CONFIG_SERIAL_TERMIOS=y +CONFIG_SIG_DEFAULT=y +CONFIG_SIG_SIGALRM_ACTION=y +CONFIG_SIG_SIGUSR1_ACTION=y +CONFIG_SIG_SIGUSR2_ACTION=y +CONFIG_SPI=y +CONFIG_STACK_COLORATION=y +CONFIG_START_DAY=30 +CONFIG_START_MONTH=11 +CONFIG_STDIO_BUFFER_SIZE=32 +CONFIG_STM32H7_BKPSRAM=y +CONFIG_STM32H7_DMA1=y +CONFIG_STM32H7_OTGFS=y +CONFIG_STM32H7_PROGMEM=y +CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y +CONFIG_STM32H7_TIM1=y +CONFIG_STM32H7_USART6=y +CONFIG_SYSTEMTICK_HOOK=y +CONFIG_SYSTEM_CDCACM=y +CONFIG_TASK_NAME_SIZE=24 +CONFIG_TTY_SIGINT=y +CONFIG_TTY_SIGINT_CHAR=0x03 +CONFIG_TTY_SIGTSTP=y +CONFIG_USART6_RXBUFSIZE=600 +CONFIG_USART6_TXBUFSIZE=300 +CONFIG_USBDEV=y +CONFIG_USBDEV_BUSPOWERED=y +CONFIG_USBDEV_MAXPOWER=500 +CONFIG_USEC_PER_TICK=1000 diff --git a/boards/x-mav/ap-h743r1/nuttx-config/include/board.h b/boards/x-mav/ap-h743r1/nuttx-config/include/board.h new file mode 100644 index 0000000000..e6ff9ec362 --- /dev/null +++ b/boards/x-mav/ap-h743r1/nuttx-config/include/board.h @@ -0,0 +1,442 @@ +/************************************************************************************ + * nuttx-configs/px4_fmu-v6u/include/board.h + * + * Copyright (C) 2016-2019 Gregory Nutt. All rights reserved. + * Authors: David Sidrane + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ +#ifndef __NUTTX_CONFIG_APH743R1_INCLUDE_BOARD_H +#define __NUTTX_CONFIG_APH743R1_INCLUDE_BOARD_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include "board_dma_map.h" + +#include + +#ifndef __ASSEMBLY__ +# include +#endif + +#include "stm32_rcc.h" +#include "stm32_sdmmc.h" + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +/* Clocking *************************************************************************/ +/* The AP-H743 R1 board provides the following clock sources: + * + * X1: 8 MHz crystal for HSE + * + * So we have these clock source available within the STM32 + * + * HSI: 16 MHz RC factory-trimmed + * HSE: 16 MHz crystal for HSE + */ + +#define STM32_BOARD_XTAL 8000000ul + +#define STM32_HSI_FREQUENCY 16000000ul +#define STM32_LSI_FREQUENCY 32000 +#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL +#define STM32_LSE_FREQUENCY 32768 + +/* Main PLL Configuration. + * + * PLL source is HSE = 16,000,000 + * + * PLL_VCOx = (STM32_HSE_FREQUENCY / PLLM) * PLLN + * Subject to: + * + * 1 <= PLLM <= 63 + * 4 <= PLLN <= 512 + * 150 MHz <= PLL_VCOL <= 420MHz + * 192 MHz <= PLL_VCOH <= 836MHz + * + * SYSCLK = PLL_VCO / PLLP + * CPUCLK = SYSCLK / D1CPRE + * Subject to + * + * PLLP1 = {2, 4, 6, 8, ..., 128} + * PLLP2,3 = {2, 3, 4, ..., 128} + * CPUCLK <= 480 MHz + */ + +#define STM32_BOARD_USEHSE + +#define STM32_PLLCFG_PLLSRC RCC_PLLCKSELR_PLLSRC_HSE + +/* PLL1, wide 4 - 8 MHz input, enable DIVP, DIVQ, DIVR + * + * PLL1_VCO = (8,000,000 / 1) * 120 = 960 MHz + * + * PLL1P = PLL1_VCO/2 = 960 MHz / 2 = 480 MHz + * PLL1Q = PLL1_VCO/4 = 960 MHz / 4 = 240 MHz + * PLL1R = PLL1_VCO/8 = 960 MHz / 8 = 120 MHz + */ + +#define STM32_PLLCFG_PLL1CFG (RCC_PLLCFGR_PLL1VCOSEL_WIDE | \ + RCC_PLLCFGR_PLL1RGE_4_8_MHZ | \ + RCC_PLLCFGR_DIVP1EN | \ + RCC_PLLCFGR_DIVQ1EN | \ + RCC_PLLCFGR_DIVR1EN) +#define STM32_PLLCFG_PLL1M RCC_PLLCKSELR_DIVM1(1) +#define STM32_PLLCFG_PLL1N RCC_PLL1DIVR_N1(120) +#define STM32_PLLCFG_PLL1P RCC_PLL1DIVR_P1(2) +#define STM32_PLLCFG_PLL1Q RCC_PLL1DIVR_Q1(4) +#define STM32_PLLCFG_PLL1R RCC_PLL1DIVR_R1(8) + +#define STM32_VCO1_FREQUENCY ((STM32_HSE_FREQUENCY / 1) * 120) +#define STM32_PLL1P_FREQUENCY (STM32_VCO1_FREQUENCY / 2) +#define STM32_PLL1Q_FREQUENCY (STM32_VCO1_FREQUENCY / 4) +#define STM32_PLL1R_FREQUENCY (STM32_VCO1_FREQUENCY / 8) + +/* PLL2 */ + +#define STM32_PLLCFG_PLL2CFG (RCC_PLLCFGR_PLL2VCOSEL_WIDE | \ + RCC_PLLCFGR_PLL2RGE_4_8_MHZ | \ + RCC_PLLCFGR_DIVP2EN | \ + RCC_PLLCFGR_DIVQ2EN | \ + RCC_PLLCFGR_DIVR2EN) +#define STM32_PLLCFG_PLL2M RCC_PLLCKSELR_DIVM2(2) +#define STM32_PLLCFG_PLL2N RCC_PLL2DIVR_N2(48) +#define STM32_PLLCFG_PLL2P RCC_PLL2DIVR_P2(2) +#define STM32_PLLCFG_PLL2Q RCC_PLL2DIVR_Q2(2) +#define STM32_PLLCFG_PLL2R RCC_PLL2DIVR_R2(2) + +#define STM32_VCO2_FREQUENCY ((STM32_HSE_FREQUENCY / 2) * 48) +#define STM32_PLL2P_FREQUENCY (STM32_VCO2_FREQUENCY / 2) +#define STM32_PLL2Q_FREQUENCY (STM32_VCO2_FREQUENCY / 2) +#define STM32_PLL2R_FREQUENCY (STM32_VCO2_FREQUENCY / 2) + +/* PLL3 */ + +#define STM32_PLLCFG_PLL3CFG (RCC_PLLCFGR_PLL3VCOSEL_WIDE | \ + RCC_PLLCFGR_PLL3RGE_4_8_MHZ | \ + RCC_PLLCFGR_DIVQ3EN) +#define STM32_PLLCFG_PLL3M RCC_PLLCKSELR_DIVM3(2) +#define STM32_PLLCFG_PLL3N RCC_PLL3DIVR_N3(48) +#define STM32_PLLCFG_PLL3P RCC_PLL3DIVR_P3(2) +#define STM32_PLLCFG_PLL3Q RCC_PLL3DIVR_Q3(4) +#define STM32_PLLCFG_PLL3R RCC_PLL3DIVR_R3(2) + +#define STM32_VCO3_FREQUENCY ((STM32_HSE_FREQUENCY / 2) * 48) +#define STM32_PLL3P_FREQUENCY (STM32_VCO3_FREQUENCY / 2) +#define STM32_PLL3Q_FREQUENCY (STM32_VCO3_FREQUENCY / 4) +#define STM32_PLL3R_FREQUENCY (STM32_VCO3_FREQUENCY / 2) + +/* SYSCLK = PLL1P = 480MHz + * CPUCLK = SYSCLK / 1 = 480 MHz + */ + +#define STM32_RCC_D1CFGR_D1CPRE (RCC_D1CFGR_D1CPRE_SYSCLK) +#define STM32_SYSCLK_FREQUENCY (STM32_PLL1P_FREQUENCY) +#define STM32_CPUCLK_FREQUENCY (STM32_SYSCLK_FREQUENCY / 1) + +/* Configure Clock Assignments */ + +/* AHB clock (HCLK) is SYSCLK/2 (240 MHz max) + * HCLK1 = HCLK2 = HCLK3 = HCLK4 = 240 + */ + +#define STM32_RCC_D1CFGR_HPRE RCC_D1CFGR_HPRE_SYSCLKd2 /* HCLK = SYSCLK / 2 */ +#define STM32_ACLK_FREQUENCY (STM32_CPUCLK_FREQUENCY / 2) /* ACLK in D1, HCLK3 in D1 */ +#define STM32_HCLK_FREQUENCY (STM32_CPUCLK_FREQUENCY / 2) /* HCLK in D2, HCLK4 in D3 */ +#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */ + +/* APB1 clock (PCLK1) is HCLK/2 (120 MHz) */ + +#define STM32_RCC_D2CFGR_D2PPRE1 RCC_D2CFGR_D2PPRE1_HCLKd2 /* PCLK1 = HCLK / 2 */ +#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/2) + +/* APB2 clock (PCLK2) is HCLK/2 (120 MHz) */ + +#define STM32_RCC_D2CFGR_D2PPRE2 RCC_D2CFGR_D2PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */ +#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2) + +/* APB3 clock (PCLK3) is HCLK/2 (120 MHz) */ + +#define STM32_RCC_D1CFGR_D1PPRE RCC_D1CFGR_D1PPRE_HCLKd2 /* PCLK3 = HCLK / 2 */ +#define STM32_PCLK3_FREQUENCY (STM32_HCLK_FREQUENCY/2) + +/* APB4 clock (PCLK4) is HCLK/4 (120 MHz) */ + +#define STM32_RCC_D3CFGR_D3PPRE RCC_D3CFGR_D3PPRE_HCLKd2 /* PCLK4 = HCLK / 2 */ +#define STM32_PCLK4_FREQUENCY (STM32_HCLK_FREQUENCY/2) + +/* Timer clock frequencies */ + +/* Timers driven from APB1 will be twice PCLK1 */ + +#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY) + +/* Timers driven from APB2 will be twice PCLK2 */ + +#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY) +#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY) +#define STM32_APB2_TIM15_CLKIN (2*STM32_PCLK2_FREQUENCY) +#define STM32_APB2_TIM16_CLKIN (2*STM32_PCLK2_FREQUENCY) +#define STM32_APB2_TIM17_CLKIN (2*STM32_PCLK2_FREQUENCY) + +/* Kernel Clock Configuration + * + * Note: look at Table 54 in ST Manual + */ + +/* I2C123 clock source */ + +#define STM32_RCC_D2CCIP2R_I2C123SRC RCC_D2CCIP2R_I2C123SEL_HSI + +/* I2C4 clock source */ + +#define STM32_RCC_D3CCIPR_I2C4SRC RCC_D3CCIPR_I2C4SEL_HSI + +/* SPI123 clock source */ + +#define STM32_RCC_D2CCIP1R_SPI123SRC RCC_D2CCIP1R_SPI123SEL_PLL2 + +/* SPI45 clock source */ + +#define STM32_RCC_D2CCIP1R_SPI45SRC RCC_D2CCIP1R_SPI45SEL_PLL2 + +/* SPI6 clock source */ + +#define STM32_RCC_D3CCIPR_SPI6SRC RCC_D3CCIPR_SPI6SEL_PLL2 + +/* USB 1 and 2 clock source */ + +#define STM32_RCC_D2CCIP2R_USBSRC RCC_D2CCIP2R_USBSEL_PLL3 + +/* ADC 1 2 3 clock source */ + +#define STM32_RCC_D3CCIPR_ADCSEL RCC_D3CCIPR_ADCSEL_PLL2 + +/* FDCAN 1 clock source */ + +// #define STM32_RCC_D2CCIP1R_FDCANSEL RCC_D2CCIP1R_FDCANSEL_HSE /* FDCAN 1 2 clock source */ + +#define STM32_FDCANCLK STM32_HSE_FREQUENCY + +/* FLASH wait states + * + * ------------ ---------- ----------- + * Vcore MAX ACLK WAIT STATES + * ------------ ---------- ----------- + * 1.15-1.26 V 70 MHz 0 + * (VOS1 level) 140 MHz 1 + * 210 MHz 2 + * 1.05-1.15 V 55 MHz 0 + * (VOS2 level) 110 MHz 1 + * 165 MHz 2 + * 220 MHz 3 + * 0.95-1.05 V 45 MHz 0 + * (VOS3 level) 90 MHz 1 + * 135 MHz 2 + * 180 MHz 3 + * 225 MHz 4 + * ------------ ---------- ----------- + */ + +#define BOARD_FLASH_WAITSTATES 2 + +/* SDMMC definitions ********************************************************/ + +/* Init 400kHz, freq = PLL1Q/(2*div) div = PLL1Q/(2*freq) */ + +#define STM32_SDMMC_INIT_CLKDIV (300 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT) + +/* 25 MHz Max for now, 25 mHZ = PLL1Q/(2*div), div = PLL1Q/(2*freq) + * div = 4.8 = 240 / 50, So round up to 5 for default speed 24 MB/s + */ + +#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA) +# define STM32_SDMMC_MMCXFR_CLKDIV (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT) +#else +# define STM32_SDMMC_MMCXFR_CLKDIV (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT) +#endif +#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA) +# define STM32_SDMMC_SDXFR_CLKDIV (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT) +#else +# define STM32_SDMMC_SDXFR_CLKDIV (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT) +#endif + +#define STM32_SDMMC_CLKCR_EDGE STM32_SDMMC_CLKCR_NEGEDGE + +/* LED definitions ******************************************************************/ +/* The board has two, LED_GREEN a Green LED and LED_BLUE a Blue LED, + * that can be controlled by software. + * + * If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way. + * The following definitions are used to access individual LEDs. + */ + +/* LED index values for use with board_userled() */ + +#define BOARD_LED1 0 +#define BOARD_LED2 1 +#define BOARD_LED3 2 +#define BOARD_NLEDS 3 + +#define BOARD_LED_RED BOARD_LED1 +#define BOARD_LED_GREEN BOARD_LED2 +#define BOARD_LED_BLUE BOARD_LED3 + +/* LED bits for use with board_userled_all() */ + +#define BOARD_LED1_BIT (1 << BOARD_LED1) +#define BOARD_LED2_BIT (1 << BOARD_LED2) +#define BOARD_LED3_BIT (1 << BOARD_LED3) + +/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in + * include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related + * events as follows: + * + * + * SYMBOL Meaning LED state + * Red Green Blue + * ---------------------- -------------------------- ------ ------ ----*/ + +#define LED_STARTED 0 /* NuttX has been started OFF OFF OFF */ +#define LED_HEAPALLOCATE 1 /* Heap has been allocated OFF OFF ON */ +#define LED_IRQSENABLED 2 /* Interrupts enabled OFF ON OFF */ +#define LED_STACKCREATED 3 /* Idle stack created OFF ON ON */ +#define LED_INIRQ 4 /* In an interrupt N/C N/C GLOW */ +#define LED_SIGNAL 5 /* In a signal handler N/C GLOW N/C */ +#define LED_ASSERTION 6 /* An assertion failed GLOW N/C GLOW */ +#define LED_PANIC 7 /* The system has crashed Blink OFF N/C */ +#define LED_IDLE 8 /* MCU is is sleep mode ON OFF OFF */ + +/* Thus if the Green LED is statically on, NuttX has successfully booted and + * is, apparently, running normally. If the Red LED is flashing at + * approximately 2Hz, then a fatal error has been detected and the system + * has halted. + */ + +/* Alternate function pin selections ************************************************/ + +#define GPIO_USART1_RX GPIO_USART1_RX_2 /* PA10 */ +#define GPIO_USART1_TX GPIO_USART1_TX_2 /* PA9 */ + +#define GPIO_USART2_RX GPIO_USART2_RX_2 /* PD6 */ +#define GPIO_USART2_TX GPIO_USART2_TX_2 /* PD5 */ + +#define GPIO_USART3_RX GPIO_USART3_RX_3 /* PD9 */ +#define GPIO_USART3_TX GPIO_USART3_TX_3 /* PD8 */ + +#define GPIO_UART4_RX GPIO_UART4_RX_3 /* PB8 */ +#define GPIO_UART4_TX GPIO_UART4_TX_3 /* PB9 */ + +#define GPIO_USART6_RX GPIO_USART6_RX_1 /* PC7 */ +#define GPIO_USART6_TX GPIO_USART6_TX_1 /* PC6 */ + +#define GPIO_UART7_RX GPIO_UART7_RX_3 /* PE7 */ +#define GPIO_UART7_TX GPIO_UART7_TX_3 /* PE8 */ + +#define GPIO_UART8_RX GPIO_UART8_RX_1 /* PE0 */ +#define GPIO_UART8_TX GPIO_UART8_TX_1 /* PE1 */ + +/* SPI + * + */ +#define ADJ_SLEW_RATE(p) (((p) & ~GPIO_SPEED_MASK) | (GPIO_SPEED_2MHz)) + +#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1 /* PA6 */ +#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1 /* PA7 */ +#define GPIO_SPI1_SCK ADJ_SLEW_RATE(GPIO_SPI1_SCK_1) /* PA5 */ + +#define GPIO_SPI3_MISO GPIO_SPI3_MISO_2 /* PC11 */ +#define GPIO_SPI3_MOSI GPIO_SPI3_MOSI_2 /* PC12 */ +#define GPIO_SPI3_SCK ADJ_SLEW_RATE(GPIO_SPI3_SCK_2) /* PC10 */ + +#define GPIO_SPI4_MISO GPIO_SPI4_MISO_2 /* PE5 */ +#define GPIO_SPI4_MOSI GPIO_SPI4_MOSI_2 /* PE6 */ +#define GPIO_SPI4_SCK ADJ_SLEW_RATE(GPIO_SPI4_SCK_2) /* PE2 */ + +/* I2C + * + */ +#define GPIO_I2C1_SCL GPIO_I2C1_SCL_1 /* PB6 */ +#define GPIO_I2C1_SDA GPIO_I2C1_SDA_1 /* PB7 */ + +#define GPIO_I2C1_SCL_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_2MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN6) +#define GPIO_I2C1_SDA_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_2MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN7) + +#define GPIO_I2C2_SCL GPIO_I2C2_SCL_1 /* PB10 */ +#define GPIO_I2C2_SDA GPIO_I2C2_SDA_1 /* PB11 */ + +#define GPIO_I2C2_SCL_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_2MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN10) +#define GPIO_I2C2_SDA_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_2MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN11) + + +#define GPIO_I2C4_SCL GPIO_I2C4_SCL_1 /* PD12 */ +#define GPIO_I2C4_SDA GPIO_I2C4_SDA_1 /* PD13 */ + +#define GPIO_I2C4_SCL_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_2MHz | GPIO_OUTPUT_SET | GPIO_PORTD | GPIO_PIN12) +#define GPIO_I2C4_SDA_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_2MHz | GPIO_OUTPUT_SET | GPIO_PORTD | GPIO_PIN13) + +#define GPIO_CAN1_RX GPIO_CAN1_RX_3 /* PD0 */ +#define GPIO_CAN1_TX GPIO_CAN1_TX_3 /* PD1 */ + +#define GPIO_CAN2_RX GPIO_CAN2_RX_1 /* PB12 */ +#define GPIO_CAN2_TX GPIO_CAN2_TX_1 /* PB13 */ + +/* SDMMC2 + * + * VDD 3.3 + * GND + * SDMMC2_CK PD6 + * SDMMC2_CMD PD7 + * SDMMC2_D0 PB14 + * SDMMC2_D1 PB15 + * SDMMC2_D2 PG11 + * SDMMC2_D3 PB4 + */ + +#define GPIO_SDMMC2_CK GPIO_SDMMC2_CK_2 /* PC1 */ +#define GPIO_SDMMC2_CMD GPIO_SDMMC2_CMD_1 /* PD7 */ +// #define GPIO_SDMMC2_D0 GPIO_SDMMC2_D0 /* PB14 */ +// #define GPIO_SDMMC2_D1 GPIO_SDMMC2_D1 /* PB15 */ +#define GPIO_SDMMC2_D2 GPIO_SDMMC2_D2_2 /* PB3 */ +// #define GPIO_SDMMC2_D3 GPIO_SDMMC2_D3 /* PB4 */ + + +#endif /*__NUTTX_CONFIG_APH743R1_INCLUDE_BOARD_H */ diff --git a/boards/x-mav/ap-h743r1/nuttx-config/include/board_dma_map.h b/boards/x-mav/ap-h743r1/nuttx-config/include/board_dma_map.h new file mode 100644 index 0000000000..657ad280d9 --- /dev/null +++ b/boards/x-mav/ap-h743r1/nuttx-config/include/board_dma_map.h @@ -0,0 +1,61 @@ +/**************************************************************************** + * + * Copyright (c) 2021 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +#pragma once + +// DMAMUX1 Using at most 8 Channels on DMA1 -------- Assigned +// V + +#define DMAMAP_SPI1_RX DMAMAP_DMA12_SPI1RX_0 /* 1 DMA1:37 IMU */ +#define DMAMAP_SPI1_TX DMAMAP_DMA12_SPI1TX_0 /* 2 DMA1:38 IMU */ + +#define DMAMAP_SPI2_RX DMAMAP_DMA12_SPI2RX_0 /* DMA1:39 */ +#define DMAMAP_SPI2_TX DMAMAP_DMA12_SPI2TX_0 /* DMA1:40 */ + +#define DMAMAP_SPI4_RX DMAMAP_DMA12_SPI4RX_0 /* 3 DMA1:83 IMU */ +#define DMAMAP_SPI4_TX DMAMAP_DMA12_SPI4TX_0 /* 4 DMA1:84 IMU */ + +#define DMAMAP_USART1_RX DMAMAP_DMA12_USART1RX_0 /* DMA1:41 GPS1 */ +#define DMAMAP_USART1_TX DMAMAP_DMA12_USART1TX_0 /* DMA1:42 GPS1 */ + +#define DMAMAP_USART2_RX DMAMAP_DMA12_USART2RX_0 /* DMA1:43 GPS2 */ +#define DMAMAP_USART2_TX DMAMAP_DMA12_USART2TX_0 /* DMA1:44 GPS2 */ + +#define DMAMAP_USART3_RX DMAMAP_DMA12_USART3RX_0 /* DMA1:45 TELEM1 */ +#define DMAMAP_USART3_TX DMAMAP_DMA12_USART3TX_0 /* DMA1:46 TELEM1 */ + +#define DMAMAP_UART4_RX DMAMAP_DMA12_UART4RX_1 /* DMA1:63 TELEM2 */ +#define DMAMAP_UART4_TX DMAMAP_DMA12_UART4TX_1 /* DMA1:64 TELEM2 */ + +#define DMAMAP_USART6_RX DMAMAP_DMA12_USART6RX_0 /* DMA1:71 PX4IO */ +#define DMAMAP_USART6_TX DMAMAP_DMA12_USART6TX_0 /* DMA1:72 PX4IO */ diff --git a/boards/x-mav/ap-h743r1/nuttx-config/nsh/defconfig b/boards/x-mav/ap-h743r1/nuttx-config/nsh/defconfig new file mode 100644 index 0000000000..b75820d410 --- /dev/null +++ b/boards/x-mav/ap-h743r1/nuttx-config/nsh/defconfig @@ -0,0 +1,273 @@ +# +# This file is autogenerated: PLEASE DO NOT EDIT IT. +# +# You can use "make menuconfig" to make any modifications to the installed .config file. +# You can then do "make savedefconfig" to generate a new defconfig file that includes your +# modifications. +# +# CONFIG_DISABLE_ENVIRON is not set +# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_MMCSD_HAVE_CARDDETECT is not set +# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set +# CONFIG_MMCSD_MMCSUPPORT is not set +# CONFIG_MMCSD_SPI is not set +# CONFIG_NSH_DISABLEBG is not set +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLE_CAT is not set +# CONFIG_NSH_DISABLE_CD is not set +# CONFIG_NSH_DISABLE_CP is not set +# CONFIG_NSH_DISABLE_DATE is not set +# CONFIG_NSH_DISABLE_DF is not set +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_ENV is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_EXPORT is not set +# CONFIG_NSH_DISABLE_FREE is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_ITEF is not set +# CONFIG_NSH_DISABLE_KILL is not set +# CONFIG_NSH_DISABLE_LOOPS is not set +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MKDIR is not set +# CONFIG_NSH_DISABLE_MKFATFS is not set +# CONFIG_NSH_DISABLE_MOUNT is not set +# CONFIG_NSH_DISABLE_MV is not set +# CONFIG_NSH_DISABLE_PRINTF is not set +# CONFIG_NSH_DISABLE_PS is not set +# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set +# CONFIG_NSH_DISABLE_PWD is not set +# CONFIG_NSH_DISABLE_RM is not set +# CONFIG_NSH_DISABLE_RMDIR is not set +# CONFIG_NSH_DISABLE_SEMICOLON is not set +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +# CONFIG_NSH_DISABLE_SOURCE is not set +# CONFIG_NSH_DISABLE_TEST is not set +# CONFIG_NSH_DISABLE_TIME is not set +# CONFIG_NSH_DISABLE_UMOUNT is not set +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +CONFIG_ARCH="arm" +CONFIG_ARCH_BOARD_CUSTOM=y +CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/x-mav/ap-h743r1/nuttx-config" +CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y +CONFIG_ARCH_BOARD_CUSTOM_NAME="px4" +CONFIG_ARCH_CHIP="stm32h7" +CONFIG_ARCH_CHIP_STM32H743VI=y +CONFIG_ARCH_CHIP_STM32H7=y +CONFIG_ARCH_INTERRUPTSTACK=768 +CONFIG_ARCH_STACKDUMP=y +CONFIG_ARMV7M_BASEPRI_WAR=y +CONFIG_ARMV7M_DCACHE=y +CONFIG_ARMV7M_DTCM=y +CONFIG_ARMV7M_ICACHE=y +CONFIG_ARMV7M_MEMCPY=y +CONFIG_ARMV7M_USEBASEPRI=y +CONFIG_ARM_MPU_EARLY_RESET=y +CONFIG_BOARDCTL_RESET=y +CONFIG_BOARD_ASSERT_RESET_VALUE=0 +CONFIG_BOARD_CRASHDUMP=y +CONFIG_BOARD_LOOPSPERMSEC=95150 +CONFIG_BOARD_RESET_ON_ASSERT=2 +CONFIG_BUILTIN=y +CONFIG_CDCACM=y +CONFIG_CDCACM_IFLOWCONTROL=y +CONFIG_CDCACM_PRODUCTID=0x0036 +CONFIG_CDCACM_PRODUCTSTR="X-MAV AP-H743r1" +CONFIG_CDCACM_RXBUFSIZE=600 +CONFIG_CDCACM_TXBUFSIZE=12000 +CONFIG_CDCACM_VENDORID=0x1B8C +CONFIG_CDCACM_VENDORSTR="X-MAV" +CONFIG_DEBUG_FULLOPT=y +CONFIG_DEBUG_HARDFAULT_ALERT=y +CONFIG_DEBUG_MEMFAULT=y +CONFIG_DEBUG_SYMBOLS=y +CONFIG_DEFAULT_SMALL=y +CONFIG_DEV_FIFO_SIZE=0 +CONFIG_DEV_PIPE_MAXSIZE=1024 +CONFIG_DEV_PIPE_SIZE=70 +CONFIG_EXPERIMENTAL=y +CONFIG_FAT_DMAMEMORY=y +CONFIG_FAT_LCNAMES=y +CONFIG_FAT_LFN=y +CONFIG_FAT_LFN_ALIAS_HASH=y +CONFIG_FDCLONE_STDIO=y +CONFIG_FS_BINFS=y +CONFIG_FS_CROMFS=y +CONFIG_FS_FAT=y +CONFIG_FS_FATTIME=y +CONFIG_FS_PROCFS=y +CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y +CONFIG_FS_PROCFS_MAX_TASKS=64 +CONFIG_FS_PROCFS_REGISTER=y +CONFIG_FS_ROMFS=y +CONFIG_GRAN=y +CONFIG_GRAN_INTR=y +CONFIG_HAVE_CXX=y +CONFIG_HAVE_CXXINITIALIZE=y +CONFIG_I2C=y +CONFIG_I2C_RESET=y +CONFIG_IDLETHREAD_STACKSIZE=750 +CONFIG_INIT_ENTRYPOINT="nsh_main" +CONFIG_INIT_STACKSIZE=3194 +CONFIG_IOB_NBUFFERS=24 +CONFIG_IOB_NCHAINS=24 +CONFIG_LIBC_FLOATINGPOINT=y +CONFIG_LIBC_LONG_LONG=y +CONFIG_LIBC_MAX_EXITFUNS=1 +CONFIG_LIBC_STRERROR=y +CONFIG_MEMSET_64BIT=y +CONFIG_MEMSET_OPTSPEED=y +CONFIG_MMCSD=y +CONFIG_MMCSD_SDIO=y +CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y +CONFIG_MM_IOB=y +CONFIG_MM_REGIONS=4 +CONFIG_MTD=y +CONFIG_MTD_BYTE_WRITE=y +CONFIG_MTD_PARTITION=y +CONFIG_MTD_PROGMEM=y +CONFIG_MTD_RAMTRON=y +CONFIG_NAME_MAX=40 +CONFIG_NSH_ARCHINIT=y +CONFIG_NSH_ARGCAT=y +CONFIG_NSH_BUILTIN_APPS=y +CONFIG_NSH_CMDPARMS=y +CONFIG_NSH_CROMFSETC=y +CONFIG_NSH_LINELEN=128 +CONFIG_NSH_MAXARGUMENTS=15 +CONFIG_NSH_NESTDEPTH=8 +CONFIG_NSH_QUOTE=y +CONFIG_NSH_ROMFSETC=y +CONFIG_NSH_ROMFSSECTSIZE=128 +CONFIG_NSH_STRERROR=y +CONFIG_NSH_VARS=y +CONFIG_OTG_ID_GPIO_DISABLE=y +CONFIG_PIPES=y +CONFIG_PREALLOC_TIMERS=50 +CONFIG_PRIORITY_INHERITANCE=y +CONFIG_PTHREAD_MUTEX_ROBUST=y +CONFIG_PTHREAD_STACK_MIN=512 +CONFIG_RAMTRON_SETSPEED=y +CONFIG_RAM_SIZE=245760 +CONFIG_RAM_START=0x20010000 +CONFIG_RAW_BINARY=y +CONFIG_READLINE_CMD_HISTORY=y +CONFIG_READLINE_TABCOMPLETION=y +CONFIG_RTC_DATETIME=y +CONFIG_SCHED_HPWORK=y +CONFIG_SCHED_HPWORKPRIORITY=249 +CONFIG_SCHED_HPWORKSTACKSIZE=1280 +CONFIG_SCHED_INSTRUMENTATION=y +CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y +CONFIG_SCHED_INSTRUMENTATION_SWITCH=y +CONFIG_SCHED_LPWORK=y +CONFIG_SCHED_LPWORKPRIORITY=50 +CONFIG_SCHED_LPWORKSTACKSIZE=1632 +CONFIG_SCHED_WAITPID=y +CONFIG_SEM_PREALLOCHOLDERS=32 +CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y +CONFIG_SERIAL_TERMIOS=y +CONFIG_SIG_DEFAULT=y +CONFIG_SIG_SIGALRM_ACTION=y +CONFIG_SIG_SIGUSR1_ACTION=y +CONFIG_SIG_SIGUSR2_ACTION=y +CONFIG_SIG_SIGWORK=4 +CONFIG_STACK_COLORATION=y +CONFIG_START_DAY=30 +CONFIG_START_MONTH=11 +CONFIG_STDIO_BUFFER_SIZE=256 +CONFIG_STM32H7_ADC1=y +CONFIG_STM32H7_ADC2=y +CONFIG_STM32H7_ADC3=y +CONFIG_STM32H7_BBSRAM=y +CONFIG_STM32H7_BBSRAM_FILES=5 +CONFIG_STM32H7_BDMA=y +CONFIG_STM32H7_BKPSRAM=y +CONFIG_STM32H7_DMA1=y +CONFIG_STM32H7_DMA2=y +CONFIG_STM32H7_DMACAPABLE=y +CONFIG_STM32H7_FLASH_OVERRIDE_I=y +CONFIG_STM32H7_FLOWCONTROL_BROKEN=y +CONFIG_STM32H7_I2C1=y +CONFIG_STM32H7_I2C2=y +CONFIG_STM32H7_I2C4=y +CONFIG_STM32H7_I2C_DYNTIMEO=y +CONFIG_STM32H7_I2C_DYNTIMEO_STARTSTOP=10 +CONFIG_STM32H7_OTGFS=y +CONFIG_STM32H7_PROGMEM=y +CONFIG_STM32H7_RTC=y +CONFIG_STM32H7_RTC_HSECLOCK=y +CONFIG_STM32H7_RTC_MAGIC_REG=1 +CONFIG_STM32H7_SAVE_CRASHDUMP=y +CONFIG_STM32H7_SDMMC2=y +CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y +CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y +CONFIG_STM32H7_SPI1=y +CONFIG_STM32H7_SPI1_DMA=y +CONFIG_STM32H7_SPI1_DMA_BUFFER=4096 +CONFIG_STM32H7_SPI3=y +CONFIG_STM32H7_SPI4=y +CONFIG_STM32H7_SPI4_DMA=y +CONFIG_STM32H7_SPI4_DMA_BUFFER=4096 +CONFIG_STM32H7_SPI_DMATHRESHOLD=8 +CONFIG_STM32H7_TIM1=y +CONFIG_STM32H7_TIM2=y +CONFIG_STM32H7_TIM3=y +CONFIG_STM32H7_TIM4=y +CONFIG_STM32H7_TIM8=y +CONFIG_STM32H7_UART4=y +CONFIG_STM32H7_UART7=y +CONFIG_STM32H7_UART8=y +CONFIG_STM32H7_USART1=y +CONFIG_STM32H7_USART2=y +CONFIG_STM32H7_USART3=y +CONFIG_STM32H7_USART6=y +CONFIG_STM32H7_USART_BREAKS=y +CONFIG_STM32H7_USART_INVERT=y +CONFIG_STM32H7_USART_SINGLEWIRE=y +CONFIG_STM32H7_USART_SWAP=y +CONFIG_SYSTEM_CDCACM=y +CONFIG_SYSTEM_NSH=y +CONFIG_TASK_NAME_SIZE=24 +CONFIG_UART4_BAUD=921600 +CONFIG_UART4_RXBUFSIZE=3000 +CONFIG_UART4_RXDMA=y +CONFIG_UART4_TXBUFSIZE=3000 +CONFIG_UART4_TXDMA=y +CONFIG_UART7_BAUD=57600 +CONFIG_UART7_RXBUFSIZE=600 +CONFIG_UART7_TXBUFSIZE=3000 +CONFIG_UART8_BAUD=57600 +CONFIG_UART8_RXBUFSIZE=600 +CONFIG_UART8_SERIAL_CONSOLE=y +CONFIG_UART8_TXBUFSIZE=3000 +CONFIG_USART1_BAUD=57600 +CONFIG_USART1_RXBUFSIZE=600 +CONFIG_USART1_RXDMA=y +CONFIG_USART1_TXBUFSIZE=1500 +CONFIG_USART1_TXDMA=y +CONFIG_USART2_BAUD=57600 +CONFIG_USART2_RXBUFSIZE=600 +CONFIG_USART2_RXDMA=y +CONFIG_USART2_TXBUFSIZE=3000 +CONFIG_USART2_TXDMA=y +CONFIG_USART3_BAUD=57600 +CONFIG_USART3_RXBUFSIZE=180 +CONFIG_USART3_RXDMA=y +CONFIG_USART3_TXBUFSIZE=1500 +CONFIG_USART3_TXDMA=y +CONFIG_USART6_BAUD=57600 +CONFIG_USART6_RXBUFSIZE=600 +CONFIG_USART6_RXDMA=y +CONFIG_USART6_TXBUFSIZE=1500 +CONFIG_USART6_TXDMA=y +CONFIG_USBDEV=y +CONFIG_USBDEV_BUSPOWERED=y +CONFIG_USBDEV_MAXPOWER=500 +CONFIG_USEC_PER_TICK=1000 +CONFIG_WATCHDOG=y +CONFIG_WQUEUE_NOTIFIER=y diff --git a/boards/x-mav/ap-h743r1/nuttx-config/scripts/bootloader_script.ld b/boards/x-mav/ap-h743r1/nuttx-config/scripts/bootloader_script.ld new file mode 100644 index 0000000000..abd27222b9 --- /dev/null +++ b/boards/x-mav/ap-h743r1/nuttx-config/scripts/bootloader_script.ld @@ -0,0 +1,213 @@ +/**************************************************************************** + * scripts/script.ld + * + * Copyright (C) 2016, 2019 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* The X-MAV AP-H743-R1 uses an STM32H743VIT6 has 2048Kb of main FLASH memory. + * The flash memory is partitioned into a User Flash memory and a System + * Flash memory. Each of these memories has two banks: + * + * 1) User Flash memory: + * + * Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each + * Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each + * + * 2) System Flash memory: + * + * Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector + * Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector + * + * 3) User option bytes for user configuration, only in Bank 1. + * + * In the STM32H743VIT6, two different boot spaces can be selected through + * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and + * BOOT_ADD1 option bytes: + * + * 1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0]. + * ST programmed value: Flash memory at 0x0800:0000 + * 2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0]. + * ST programmed value: System bootloader at 0x1FF0:0000 + * + * The AP-H743-R1 has a Button on board, the BOOT0 pin is at ground so by default, + * the STM32 will boot to address 0x0800:0000 in FLASH unless the button has been pressed, + * then the boot will be from 0x1FF0:0000 + * + * The STM32H743VIT6 also has 1024Kb of data SRAM. + * SRAM is split up into several blocks and into three power domains: + * + * 1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with + * 0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus + * + * 1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000 + * + * The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit + * DTCM ports. The DTCM-RAM could be used for critical real-time + * data, such as interrupt service routines or stack / heap memory. + * Both DTCM-RAMs can be used in parallel (for load/store operations) + * thanks to the Cortex-M7 dual issue capability. + * + * 1.2) 64Kb of ITCM-RAM beginning at address 0x0000:0000 + * + * This RAM is connected to ITCM 64-bit interface designed for + * execution of critical real-times routines by the CPU. + * + * 2) AXI SRAM (D1 domain) accessible by all system masters except BDMA + * through D1 domain AXI bus matrix + * + * 2.1) 512Kb of SRAM beginning at address 0x2400:0000 + * + * 3) AHB SRAM (D2 domain) accessible by all system masters except BDMA + * through D2 domain AHB bus matrix + * + * 3.1) 128Kb of SRAM1 beginning at address 0x3000:0000 + * 3.2) 128Kb of SRAM2 beginning at address 0x3002:0000 + * 3.3) 32Kb of SRAM3 beginning at address 0x3004:0000 + * + * SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000 + * + * 4) AHB SRAM (D3 domain) accessible by most of system masters + * through D3 domain AHB bus matrix + * + * 4.1) 64Kb of SRAM4 beginning at address 0x3800:0000 + * 4.1) 4Kb of backup RAM beginning at address 0x3880:0000 + * + * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000 + * where the code expects to begin execution by jumping to the entry point in + * the 0x0800:0000 address range. + */ + +MEMORY +{ + itcm (rwx) : ORIGIN = 0x00000000, LENGTH = 64K + flash (rx) : ORIGIN = 0x08000000, LENGTH = 2048K + dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH = 64K + dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH = 64K + sram (rwx) : ORIGIN = 0x24000000, LENGTH = 512K + sram1 (rwx) : ORIGIN = 0x30000000, LENGTH = 128K + sram2 (rwx) : ORIGIN = 0x30020000, LENGTH = 128K + sram3 (rwx) : ORIGIN = 0x30040000, LENGTH = 32K + sram4 (rwx) : ORIGIN = 0x38000000, LENGTH = 64K + bbram (rwx) : ORIGIN = 0x38800000, LENGTH = 4K +} + +OUTPUT_ARCH(arm) +EXTERN(_vectors) +ENTRY(_stext) + +/* + * Ensure that abort() is present in the final object. The exception handling + * code pulled in by libgcc.a requires it (and that code cannot be easily avoided). + */ +EXTERN(abort) +EXTERN(_bootdelay_signature) + +SECTIONS +{ + .text : { + _stext = ABSOLUTE(.); + *(.vectors) + . = ALIGN(32); + /* + This signature provides the bootloader with a way to delay booting + */ + _bootdelay_signature = ABSOLUTE(.); + FILL(0xffecc2925d7d05c5) + . += 8; + *(.text .text.*) + *(.fixup) + *(.gnu.warning) + *(.rodata .rodata.*) + *(.gnu.linkonce.t.*) + *(.glue_7) + *(.glue_7t) + *(.got) + *(.gcc_except_table) + *(.gnu.linkonce.r.*) + _etext = ABSOLUTE(.); + + } > flash + + /* + * Init functions (static constructors and the like) + */ + .init_section : { + _sinit = ABSOLUTE(.); + KEEP(*(.init_array .init_array.*)) + _einit = ABSOLUTE(.); + } > flash + + + .ARM.extab : { + *(.ARM.extab*) + } > flash + + __exidx_start = ABSOLUTE(.); + .ARM.exidx : { + *(.ARM.exidx*) + } > flash + __exidx_end = ABSOLUTE(.); + + _eronly = ABSOLUTE(.); + + .data : { + _sdata = ABSOLUTE(.); + *(.data .data.*) + *(.gnu.linkonce.d.*) + CONSTRUCTORS + _edata = ABSOLUTE(.); + } > sram AT > flash + + .bss : { + _sbss = ABSOLUTE(.); + *(.bss .bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + . = ALIGN(4); + _ebss = ABSOLUTE(.); + } > sram + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_info 0 : { *(.debug_info) } + .debug_line 0 : { *(.debug_line) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_aranges 0 : { *(.debug_aranges) } +} diff --git a/boards/x-mav/ap-h743r1/nuttx-config/scripts/script.ld b/boards/x-mav/ap-h743r1/nuttx-config/scripts/script.ld new file mode 100644 index 0000000000..ace39a1bd7 --- /dev/null +++ b/boards/x-mav/ap-h743r1/nuttx-config/scripts/script.ld @@ -0,0 +1,228 @@ +/**************************************************************************** + * scripts/script.ld + * + * Copyright (C) 2020 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* The board uses an STM32H743VIT6 and has 2048Kb of main FLASH memory. + * The flash memory is partitioned into a User Flash memory and a System + * Flash memory. Each of these memories has two banks: + * + * 1) User Flash memory: + * + * Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each + * Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each + * + * 2) System Flash memory: + * + * Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector + * Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector + * + * 3) User option bytes for user configuration, only in Bank 1. + * + * In the STM32H743VIT6, two different boot spaces can be selected through + * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and + * BOOT_ADD1 option bytes: + * + * 1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0]. + * ST programmed value: Flash memory at 0x0800:0000 + * 2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0]. + * ST programmed value: System bootloader at 0x1FF0:0000 + * + * There's a button on board, the BOOT0 pin is at ground so by default, + * the STM32 will boot to address 0x0800:0000 in FLASH unless the switch is + * drepresed, then the boot will be from 0x1FF0:0000 + * + * The STM32H743VIT6 also has 1024Kb of data SRAM. + * SRAM is split up into several blocks and into three power domains: + * + * 1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with + * 0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus + * + * 1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000 + * + * The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit + * DTCM ports. The DTCM-RAM could be used for critical real-time + * data, such as interrupt service routines or stack / heap memory. + * Both DTCM-RAMs can be used in parallel (for load/store operations) + * thanks to the Cortex-M7 dual issue capability. + * + * 1.2) 64Kb of ITCM-RAM beginning at address 0x0000:0000 + * + * This RAM is connected to ITCM 64-bit interface designed for + * execution of critical real-times routines by the CPU. + * + * 2) AXI SRAM (D1 domain) accessible by all system masters except BDMA + * through D1 domain AXI bus matrix + * + * 2.1) 512Kb of SRAM beginning at address 0x2400:0000 + * + * 3) AHB SRAM (D2 domain) accessible by all system masters except BDMA + * through D2 domain AHB bus matrix + * + * 3.1) 128Kb of SRAM1 beginning at address 0x3000:0000 + * 3.2) 128Kb of SRAM2 beginning at address 0x3002:0000 + * 3.3) 32Kb of SRAM3 beginning at address 0x3004:0000 + * + * SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000 + * + * 4) AHB SRAM (D3 domain) accessible by most of system masters + * through D3 domain AHB bus matrix + * + * 4.1) 64Kb of SRAM4 beginning at address 0x3800:0000 + * 4.1) 4Kb of backup RAM beginning at address 0x3880:0000 + * + * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000 + * where the code expects to begin execution by jumping to the entry point in + * the 0x0800:0000 address range. + */ + +MEMORY +{ + ITCM_RAM (rwx) : ORIGIN = 0x00000000, LENGTH = 64K + FLASH (rx) : ORIGIN = 0x08020000, LENGTH = 1920K + + DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 64K + DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH = 64K + AXI_SRAM (rwx) : ORIGIN = 0x24000000, LENGTH = 512K /* D1 domain AXI bus */ + SRAM1 (rwx) : ORIGIN = 0x30000000, LENGTH = 128K /* D2 domain AHB bus */ + SRAM2 (rwx) : ORIGIN = 0x30020000, LENGTH = 128K /* D2 domain AHB bus */ + SRAM3 (rwx) : ORIGIN = 0x30040000, LENGTH = 32K /* D2 domain AHB bus */ + SRAM4 (rwx) : ORIGIN = 0x38000000, LENGTH = 64K /* D3 domain */ + BKPRAM (rwx) : ORIGIN = 0x38800000, LENGTH = 4K +} + +OUTPUT_ARCH(arm) +EXTERN(_vectors) +ENTRY(_stext) + +/* + * Ensure that abort() is present in the final object. The exception handling + * code pulled in by libgcc.a requires it (and that code cannot be easily avoided). + */ +EXTERN(abort) +EXTERN(_bootdelay_signature) + +SECTIONS +{ + .text : { + _stext = ABSOLUTE(.); + *(.vectors) + . = ALIGN(32); + /* + This signature provides the bootloader with a way to delay booting + */ + _bootdelay_signature = ABSOLUTE(.); + FILL(0xffecc2925d7d05c5) + . += 8; + *(.text .text.*) + *(.fixup) + *(.gnu.warning) + *(.rodata .rodata.*) + *(.gnu.linkonce.t.*) + *(.glue_7) + *(.glue_7t) + *(.got) + *(.gcc_except_table) + *(.gnu.linkonce.r.*) + _etext = ABSOLUTE(.); + + } > FLASH + + /* + * Init functions (static constructors and the like) + */ + .init_section : { + _sinit = ABSOLUTE(.); + KEEP(*(.init_array .init_array.*)) + _einit = ABSOLUTE(.); + } > FLASH + + + .ARM.extab : { + *(.ARM.extab*) + } > FLASH + + __exidx_start = ABSOLUTE(.); + .ARM.exidx : { + *(.ARM.exidx*) + } > FLASH + __exidx_end = ABSOLUTE(.); + + _eronly = ABSOLUTE(.); + + .data : { + _sdata = ABSOLUTE(.); + *(.data .data.*) + *(.gnu.linkonce.d.*) + CONSTRUCTORS + _edata = ABSOLUTE(.); + + /* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */ + . = ALIGN(16); + FILL(0xffff) + . += 16; + } > AXI_SRAM AT > FLASH = 0xffff + + .bss : { + _sbss = ABSOLUTE(.); + *(.bss .bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + . = ALIGN(4); + _ebss = ABSOLUTE(.); + } > AXI_SRAM + + /* Emit the the D3 power domain section for locating BDMA data */ + + .sram4_reserve (NOLOAD) : + { + *(.sram4) + . = ALIGN(4); + _sram4_heap_start = ABSOLUTE(.); + } > SRAM4 + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_info 0 : { *(.debug_info) } + .debug_line 0 : { *(.debug_line) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_aranges 0 : { *(.debug_aranges) } +} diff --git a/boards/x-mav/ap-h743r1/pwm_voltage/CMakeLists.txt b/boards/x-mav/ap-h743r1/pwm_voltage/CMakeLists.txt new file mode 100644 index 0000000000..6db1696208 --- /dev/null +++ b/boards/x-mav/ap-h743r1/pwm_voltage/CMakeLists.txt @@ -0,0 +1,42 @@ +############################################################################ +# +# Copyright (c) 2025 PX4 Development Team. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name PX4 nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +px4_add_module( + MODULE modules__pwm_voltage_apply + MAIN pwm_voltage_apply + + SRCS + pwm_voltage.cpp + DEPENDS + px4_work_queue + ) diff --git a/boards/x-mav/ap-h743r1/pwm_voltage/parameters.c b/boards/x-mav/ap-h743r1/pwm_voltage/parameters.c new file mode 100644 index 0000000000..728bcc7a55 --- /dev/null +++ b/boards/x-mav/ap-h743r1/pwm_voltage/parameters.c @@ -0,0 +1,43 @@ +/**************************************************************************** + * + * Copyright (c) 2025 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * Control PWM output voltage + * + * @value 0 3.3V + * @value 1 5.0V + * + * @reboot_required true + * @group PWM Outputs + */ +PARAM_DEFINE_INT32(PWM_VOLT_SEL, 0); diff --git a/boards/x-mav/ap-h743r1/pwm_voltage/pwm_voltage.cpp b/boards/x-mav/ap-h743r1/pwm_voltage/pwm_voltage.cpp new file mode 100644 index 0000000000..2bef9ae0f6 --- /dev/null +++ b/boards/x-mav/ap-h743r1/pwm_voltage/pwm_voltage.cpp @@ -0,0 +1,56 @@ +/**************************************************************************** + * + * Copyright (c) 2025 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +#include +#include + +#include +#include + +#include "board_config.h" + +extern "C" int pwm_voltage_apply_main(int argc, char *argv[]) +{ + int32_t pwm_volt_sel = 0; + + param_get(param_find("PWM_VOLT_SEL"), &pwm_volt_sel); + + if (pwm_volt_sel != 0) { + PWM_5V_VOLT_SEL(true); + + } else { + PWM_5V_VOLT_SEL(false); + } + + return 0; +} diff --git a/boards/x-mav/ap-h743r1/rover.px4board b/boards/x-mav/ap-h743r1/rover.px4board new file mode 100644 index 0000000000..e105ef2772 --- /dev/null +++ b/boards/x-mav/ap-h743r1/rover.px4board @@ -0,0 +1,15 @@ +CONFIG_MODULES_FLIGHT_MODE_MANAGER=n +CONFIG_MODULES_FW_ATT_CONTROL=n +CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n +CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n +CONFIG_MODULES_FW_MODE_MANAGER=n +CONFIG_MODULES_FW_RATE_CONTROL=n +CONFIG_MODULES_MC_ATT_CONTROL=n +CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n +CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n +CONFIG_MODULES_MC_POS_CONTROL=n +CONFIG_MODULES_MC_RATE_CONTROL=n +CONFIG_MODULES_VTOL_ATT_CONTROL=n +CONFIG_MODULES_ROVER_ACKERMANN=y +CONFIG_MODULES_ROVER_DIFFERENTIAL=y +CONFIG_MODULES_ROVER_MECANUM=y diff --git a/boards/x-mav/ap-h743r1/src/CMakeLists.txt b/boards/x-mav/ap-h743r1/src/CMakeLists.txt new file mode 100644 index 0000000000..123bc75b16 --- /dev/null +++ b/boards/x-mav/ap-h743r1/src/CMakeLists.txt @@ -0,0 +1,70 @@ +############################################################################ +# +# Copyright (c) 2021 PX4 Development Team. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name PX4 nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ +if("${PX4_BOARD_LABEL}" STREQUAL "bootloader") + add_library(drivers_board + bootloader_main.c + usb.c + ) + target_link_libraries(drivers_board + PRIVATE + nuttx_arch + nuttx_drivers + bootloader + ) + target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/bootloader/common) + +else() + add_library(drivers_board + i2c.cpp + init.c + led.c + sdio.c + spi.cpp + timer_config.cpp + usb.c + mtd.cpp + can.c + ) + # add_dependencies(drivers_board arch_board_hw_info) + + target_link_libraries(drivers_board + PRIVATE + arch_io_pins + arch_spi + arch_board_hw_info + drivers__led + nuttx_arch + nuttx_drivers + px4_layer + ) +endif() diff --git a/boards/x-mav/ap-h743r1/src/board_config.h b/boards/x-mav/ap-h743r1/src/board_config.h new file mode 100644 index 0000000000..254261ba1a --- /dev/null +++ b/boards/x-mav/ap-h743r1/src/board_config.h @@ -0,0 +1,226 @@ +/**************************************************************************** + * + * Copyright (c) 2021 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file board_config.h + * + * Board internal definitions + */ + +#pragma once + +/**************************************************************************************************** + * Included Files + ****************************************************************************************************/ + +#include +#include +#include + +#include + +/**************************************************************************************************** + * Definitions + ****************************************************************************************************/ + +/* PX4IO connection configuration */ +#define BOARD_USES_PX4IO_VERSION 2 +#define PX4IO_SERIAL_DEVICE "/dev/ttyS4" +#define PX4IO_SERIAL_TX_GPIO GPIO_USART6_TX +#define PX4IO_SERIAL_RX_GPIO GPIO_USART6_RX +#define PX4IO_SERIAL_BASE STM32_USART6_BASE +#define PX4IO_SERIAL_VECTOR STM32_IRQ_USART6 +#define PX4IO_SERIAL_TX_DMAMAP DMAMAP_USART6_TX +#define PX4IO_SERIAL_RX_DMAMAP DMAMAP_USART6_RX +#define PX4IO_SERIAL_RCC_REG STM32_RCC_APB2ENR +#define PX4IO_SERIAL_RCC_EN RCC_APB2ENR_USART6EN +#define PX4IO_SERIAL_CLOCK STM32_PCLK2_FREQUENCY +#define PX4IO_SERIAL_BITRATE 1500000 /* 1.5Mbps -> max rate for IO */ + +/* LEDs are driven with push open drain to support Anode to 5V or 3.3V */ + +# define GPIO_nLED_RED /* PD15 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN15) +# define GPIO_nLED_GREEN /* PD11 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN11) +# define GPIO_nLED_BLUE /* PD10 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN10) + +# define BOARD_HAS_CONTROL_STATUS_LEDS 1 +# define BOARD_OVERLOAD_LED LED_RED +# define BOARD_ARMED_STATE_LED LED_BLUE + +/* + * ADC channels + * + * These are the channel numbers of the ADCs of the microcontroller that + * can be used by the Px4 Firmware in the adc driver + */ + +/* ADC defines to be used in sensors.cpp to read from a particular channel */ + +#define SYSTEM_ADC_BASE STM32_ADC1_BASE + +#define ADC12_CH(n) (n) +#define ADC3_CH(n) (n) + +#define ANALOG_PC3 (GPIO_ANALOG|GPIO_PORTC|GPIO_PIN3) + +#define PX4_ADC_GPIO \ + /* PC4 */ GPIO_ADC12_INP4, \ + /* PC5 */ GPIO_ADC12_INP8 + +/* Define GPIO pins used as ADC N.B. Channel numbers must match below */ +/* Define Channel numbers must match above GPIO pin IN(n)*/ +#define ADC_BATTERY_VOLTAGE_CHANNEL ADC12_CH(4) +#define ADC_BATTERY_CURRENT_CHANNEL ADC12_CH(8) + +#define ADC_CHANNELS \ + ((1 << ADC_BATTERY_VOLTAGE_CHANNEL) | \ + (1 << ADC_BATTERY_CURRENT_CHANNEL)) + +#define BOARD_ADC_OPEN_CIRCUIT_V (1.6f) + +#define BOARD_HAS_STATIC_MANIFEST 1 + +#define UAVCAN_NUM_IFACES_RUNTIME 1 + +/* PWM + */ +#define DIRECT_PWM_OUTPUT_CHANNELS 7 + +#define BOARD_HAS_PWM DIRECT_PWM_OUTPUT_CHANNELS + +/* PWM Power */ +#define GPIO_PWM_VOLT_SEL /* PA8 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN8) +#define PWM_5V_VOLT_SEL(on_true) px4_arch_gpiowrite(GPIO_PWM_VOLT_SEL, (on_true)) + +/* Tone alarm output */ +#define TONE_ALARM_TIMER 5 /* Timer 5 */ +#define TONE_ALARM_CHANNEL 4 /* PA3 GPIO_TIM5_CH4 */ +#define GPIO_BUZZER_1 /* PA3 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN3) + +#define GPIO_TONE_ALARM_IDLE GPIO_BUZZER_1 +#define GPIO_TONE_ALARM GPIO_BUZZER_1 + +/* USB OTG FS + * + * PE15 OTG_FS_VBUS VBUS sensing + */ +#define GPIO_OTGFS_VBUS /* PE15 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_100MHz|GPIO_PORTE|GPIO_PIN15) +#define BOARD_ADC_USB_CONNECTED (px4_arch_gpioread(GPIO_OTGFS_VBUS)) + +/* High-resolution timer */ +#define HRT_TIMER 8 /* use timer1 for the HRT */ +#define HRT_TIMER_CHANNEL 1 /* use capture/compare channel 1 */ + +/* RC Serial port */ +#define RC_SERIAL_PORT "/dev/ttyS4" +#define BOARD_SUPPORTS_RC_SERIAL_PORT_OUTPUT + +/* SD card bringup does not work if performed on the IDLE thread because it + * will cause waiting. Use either: + * + * CONFIG_LIB_BOARDCTL=y, OR + * CONFIG_BOARD_INITIALIZE=y && CONFIG_BOARD_INITTHREAD=y + */ +#define SDIO_SLOTNO 0 /* Only one slot */ +#define SDIO_MINOR 0 +#if defined(CONFIG_BOARD_INITIALIZE) && !defined(CONFIG_LIB_BOARDCTL) && \ + !defined(CONFIG_BOARD_INITTHREAD) +# warning SDIO initialization cannot be perfomed on the IDLE thread +#endif + +/* This board provides a DMA pool and APIs */ +#define BOARD_DMA_ALLOC_POOL_SIZE 5120 + +/* This board provides the board_on_reset interface */ +#define BOARD_HAS_ON_RESET 1 + +#define PX4_GPIO_INIT_LIST { \ + GPIO_CAN1_TX,\ + GPIO_CAN1_RX,\ + GPIO_CAN2_TX,\ + GPIO_CAN2_RX,\ + PX4_ADC_GPIO,\ + GPIO_TONE_ALARM_IDLE,\ + GPIO_PWM_VOLT_SEL\ + } + +#define BOARD_ENABLE_CONSOLE_BUFFER + +#define BOARD_NUM_IO_TIMERS 5 + + +__BEGIN_DECLS + +/**************************************************************************************************** + * Public Types + ****************************************************************************************************/ + +/**************************************************************************************************** + * Public data + ****************************************************************************************************/ + +#ifndef __ASSEMBLY__ + +/**************************************************************************************************** + * Public Functions + ****************************************************************************************************/ + +/**************************************************************************** + * Name: stm32_sdio_initialize + * + * Description: + * Initialize SDIO-based MMC/SD card support + * + ****************************************************************************/ + +int stm32_sdio_initialize(void); + +/**************************************************************************************************** + * Name: stm32_spiinitialize + * + * Description: + * Called to configure SPI chip select GPIO pins for the board. + * + ****************************************************************************************************/ + +extern void stm32_spiinitialize(void); + +extern void stm32_usbinitialize(void); + +extern void board_peripheral_reset(int ms); + +#include + +#endif /* __ASSEMBLY__ */ + +__END_DECLS diff --git a/boards/x-mav/ap-h743r1/src/bootloader_main.c b/boards/x-mav/ap-h743r1/src/bootloader_main.c new file mode 100644 index 0000000000..5670308a29 --- /dev/null +++ b/boards/x-mav/ap-h743r1/src/bootloader_main.c @@ -0,0 +1,75 @@ +/**************************************************************************** + * + * Copyright (c) 2021 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file bootloader_main.c + * + * FMU-specific early startup code for bootloader +*/ + +#include "board_config.h" +#include "bl.h" + +#include +#include +#include +#include +#include +#include "arm_internal.h" +#include + +extern int sercon_main(int c, char **argv); + +__EXPORT void board_on_reset(int status) {} + +__EXPORT void stm32_boardinitialize(void) +{ + /* configure USB interfaces */ + stm32_usbinitialize(); +} + +__EXPORT int board_app_initialize(uintptr_t arg) +{ + return 0; +} + +void board_late_initialize(void) +{ + sercon_main(0, NULL); +} + +extern void sys_tick_handler(void); +void board_timerhook(void) +{ + sys_tick_handler(); +} diff --git a/boards/x-mav/ap-h743r1/src/can.c b/boards/x-mav/ap-h743r1/src/can.c new file mode 100644 index 0000000000..71a89955e2 --- /dev/null +++ b/boards/x-mav/ap-h743r1/src/can.c @@ -0,0 +1,140 @@ +/**************************************************************************** + * + * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file px4fmu_can.c + * + * Board-specific CAN functions. + */ + +#if !defined(CONFIG_CAN) + +#include + +#include "board_config.h" + + +__EXPORT +uint16_t board_get_can_interfaces(void) +{ + uint16_t enabled_interfaces = 0x3; + + enabled_interfaces &= ~(1 << 1); + + return enabled_interfaces; +} + +#else + +#include +#include + +#include +#include + +#include "chip.h" +#include "arm_internal.h" + +#include "chip.h" +#include "stm32_can.h" +#include "board_config.h" + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ +/* Configuration ********************************************************************/ + +#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2) +# warning "Both CAN1 and CAN2 are enabled. Assuming only CAN1." +# undef CONFIG_STM32_CAN2 +#endif + +#ifdef CONFIG_STM32_CAN1 +# define CAN_PORT 1 +#else +# define CAN_PORT 2 +#endif + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ +int can_devinit(void); + +/************************************************************************************ + * Name: can_devinit + * + * Description: + * All STM32 architectures must provide the following interface to work with + * examples/can. + * + ************************************************************************************/ + +int can_devinit(void) +{ + static bool initialized = false; + struct can_dev_s *can; + int ret; + + /* Check if we have already initialized */ + + if (!initialized) { + /* Call stm32_caninitialize() to get an instance of the CAN interface */ + + can = stm32_caninitialize(CAN_PORT); + + if (can == NULL) { + canerr("ERROR: Failed to get CAN interface\n"); + return -ENODEV; + } + + /* Register the CAN driver at "/dev/can0" */ + + ret = can_register("/dev/can0", can); + + if (ret < 0) { + canerr("ERROR: can_register failed: %d\n", ret); + return ret; + } + + /* Now we are initialized */ + + initialized = true; + } + + return OK; +} +#endif /* CONFIG_CAN */ diff --git a/boards/x-mav/ap-h743r1/src/hw_config.h b/boards/x-mav/ap-h743r1/src/hw_config.h new file mode 100644 index 0000000000..faffbab701 --- /dev/null +++ b/boards/x-mav/ap-h743r1/src/hw_config.h @@ -0,0 +1,135 @@ +/**************************************************************************** + * + * Copyright (C) 2021 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +#pragma once + +/**************************************************************************** + * 10-8--2016: + * To simplify the ripple effect on the tools, we will be using + * /dev/serial/by-id/PX4 to locate PX4 devices. Therefore + * moving forward all Bootloaders must contain the prefix "PX4 BL " + * in the USBDEVICESTRING + * This Change will be made in an upcoming BL release + ****************************************************************************/ +/* + * Define usage to configure a bootloader + * + * + * Constant example Usage + * APP_LOAD_ADDRESS 0x08004000 - The address in Linker Script, where the app fw is org-ed + * BOOTLOADER_DELAY 5000 - Ms to wait while under USB pwr or bootloader request + * BOARD_FMUV2 + * INTERFACE_USB 1 - (Optional) Scan and use the USB interface for bootloading + * INTERFACE_USART 1 - (Optional) Scan and use the Serial interface for bootloading + * USBDEVICESTRING "PX4 BL FMU v2.x" - USB id string + * USBPRODUCTID 0x0011 - PID Should match defconfig + * BOOT_DELAY_ADDRESS 0x000001a0 - (Optional) From the linker script from Linker Script to get a custom + * delay provided by an APP FW + * BOARD_TYPE 9 - Must match .prototype boad_id + * _FLASH_KBYTES (*(uint16_t *)0x1fff7a22) - Run time flash size detection + * BOARD_FLASH_SECTORS ((_FLASH_KBYTES == 0x400) ? 11 : 23) - Run time determine the physical last sector + * BOARD_FLASH_SECTORS 11 - Hard coded zero based last sector + * BOARD_FLASH_SIZE (_FLASH_KBYTES*1024)- Total Flash size of device, determined at run time. + * (1024 * 1024) - Hard coded Total Flash of device - The bootloader and app reserved will be deducted + * programmatically + * + * BOARD_FIRST_FLASH_SECTOR_TO_ERASE 2 - Optional sectors index in the flash_sectors table (F4 only), to begin erasing. + * This is to allow sectors to be reserved for app fw usage. That will NOT be erased + * during a FW upgrade. + * The default is 0, and selects the first sector to be erased, as the 0th entry in the + * flash_sectors table. Which is the second physical sector of FLASH in the device. + * The first physical sector of FLASH is used by the bootloader, and is not defined + * in the table. + * + * APP_RESERVATION_SIZE (BOARD_FIRST_FLASH_SECTOR_TO_ERASE * 16 * 1024) - Number of bytes reserved by the APP FW. This number plus + * BOOTLOADER_RESERVATION_SIZE will be deducted from + * BOARD_FLASH_SIZE to determine the size of the App FW + * and hence the address space of FLASH to erase and program. + * USBMFGSTRING "PX4 AP" - Optional USB MFG string (default is '3D Robotics' if not defined.) + * SERIAL_BREAK_DETECT_DISABLED - Optional prevent break selection on Serial port from entering or staying in BL + * + * * Other defines are somewhat self explanatory. + */ + +/* Boot device selection list*/ +#define USB0_DEV 0x01 +#define SERIAL0_DEV 0x02 +#define SERIAL1_DEV 0x04 + +#define APP_LOAD_ADDRESS 0x08020000 +#define BOOTLOADER_DELAY 5000 +#define INTERFACE_USB 1 +#define INTERFACE_USB_CONFIG "/dev/ttyACM0" +#define BOARD_VBUS MK_GPIO_INPUT(GPIO_OTGFS_VBUS) + +//#define USE_VBUS_PULL_DOWN +// #define INTERFACE_USART 6 +#define INTERFACE_USART_CONFIG "/dev/ttyS5,57600" +#define BOOT_DELAY_ADDRESS 0x000001a0 +#define BOARD_TYPE 1203 +#define _FLASH_KBYTES (*(uint32_t *)0x1FF1E880) +#define BOARD_FLASH_SECTORS (15) +#define BOARD_FLASH_SIZE (_FLASH_KBYTES * 1024) + +#define OSC_FREQ 8 + +#define BOARD_PIN_LED_ACTIVITY GPIO_nLED_BLUE // BLUE +#define BOARD_PIN_LED_BOOTLOADER GPIO_nLED_RED // RED +#define BOARD_LED_ON 1 +#define BOARD_LED_OFF 0 + +#define SERIAL_BREAK_DETECT_DISABLED 1 + +#if !defined(ARCH_SN_MAX_LENGTH) +# define ARCH_SN_MAX_LENGTH 12 +#endif + +#if !defined(APP_RESERVATION_SIZE) +# define APP_RESERVATION_SIZE 0 +#endif + +#if !defined(BOARD_FIRST_FLASH_SECTOR_TO_ERASE) +# define BOARD_FIRST_FLASH_SECTOR_TO_ERASE 1 +#endif + +#if !defined(USB_DATA_ALIGN) +# define USB_DATA_ALIGN +#endif + +#ifndef BOOT_DEVICES_SELECTION +# define BOOT_DEVICES_SELECTION USB0_DEV|SERIAL0_DEV|SERIAL1_DEV +#endif + +#ifndef BOOT_DEVICES_FILTER_ONUSB +# define BOOT_DEVICES_FILTER_ONUSB USB0_DEV|SERIAL0_DEV|SERIAL1_DEV +#endif diff --git a/boards/x-mav/ap-h743r1/src/i2c.cpp b/boards/x-mav/ap-h743r1/src/i2c.cpp new file mode 100644 index 0000000000..d836ada04f --- /dev/null +++ b/boards/x-mav/ap-h743r1/src/i2c.cpp @@ -0,0 +1,40 @@ +/**************************************************************************** + * + * Copyright (C) 2021 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +#include + +constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = { + initI2CBusInternal(1), + initI2CBusExternal(2), + initI2CBusExternal(4), +}; diff --git a/boards/x-mav/ap-h743r1/src/init.c b/boards/x-mav/ap-h743r1/src/init.c new file mode 100644 index 0000000000..6b41d489bf --- /dev/null +++ b/boards/x-mav/ap-h743r1/src/init.c @@ -0,0 +1,211 @@ +/**************************************************************************** + * + * Copyright (c) 2021 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file init.c + * + * FMU-specific early startup code. This file implements the + * board_app_initialize() function that is called early by nsh during startup. + * + * Code here is run before the rcS script is invoked; it should start required + * subsystems and perform board-specific initialisation. + */ + +#include "board_config.h" + +#include + +#include +#include +#include +#include +#include +#include "arm_internal.h" + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +# if defined(FLASH_BASED_PARAMS) +# include +#endif + +__BEGIN_DECLS +extern void led_init(void); +extern void led_on(int led); +extern void led_off(int led); +__END_DECLS + +/************************************************************************************ + * Name: board_peripheral_reset + * + * Description: + * + ************************************************************************************/ +__EXPORT void board_peripheral_reset(int ms) +{ + UNUSED(ms); +} + +/************************************************************************************ + * Name: board_on_reset + * + * Description: + * Optionally provided function called on entry to board_system_reset + * It should perform any house keeping prior to the rest. + * + * status - 1 if resetting to boot loader + * 0 if just resetting + * + ************************************************************************************/ +__EXPORT void board_on_reset(int status) +{ + for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) { + px4_arch_configgpio(PX4_MAKE_GPIO_INPUT(io_timer_channel_get_as_pwm_input(i))); + } + + /* + * On resets invoked from system (not boot) ensure we establish a low + * output state on PWM pins to disarm the ESC and prevent the reset from potentially + * spinning up the motors. + */ + if (status >= 0) { + up_mdelay(100); + } +} + +/************************************************************************************ + * Name: stm32_boardinitialize + * + * Description: + * All STM32 architectures must provide the following entry point. This entry point + * is called early in the initialization -- after all memory has been configured + * and mapped but before any devices have been initialized. + * + ************************************************************************************/ +__EXPORT void stm32_boardinitialize(void) +{ + /* Reset PWM first thing */ + board_on_reset(-1); + + /* configure LEDs */ + board_autoled_initialize(); + + /* configure pins */ + const uint32_t gpio[] = PX4_GPIO_INIT_LIST; + px4_gpio_init(gpio, arraySize(gpio)); + + /* configure SPI interfaces */ + stm32_spiinitialize(); + + /* configure USB interfaces */ + stm32_usbinitialize(); + +} + +/**************************************************************************** + * Name: board_app_initialize + * + * Description: + * Perform application specific initialization. This function is never + * called directly from application code, but only indirectly via the + * (non-standard) boardctl() interface using the command BOARDIOC_INIT. + * + * Input Parameters: + * arg - The boardctl() argument is passed to the board_app_initialize() + * implementation without modification. The argument has no + * meaning to NuttX; + * + * Returned Value: + * Zero (OK) is returned on success; a negated errno value is returned on + * any failure to indicate the nature of the failure. + * + ****************************************************************************/ +__EXPORT int board_app_initialize(uintptr_t arg) +{ + /* Need hrt running before using the ADC */ + px4_platform_init(); + + /* configure the DMA allocator */ + if (board_dma_alloc_init() < 0) { + syslog(LOG_ERR, "[boot] DMA alloc FAILED\n"); + } + + /* initial LED state */ + drv_led_start(); + led_off(LED_RED); + led_off(LED_BLUE); + + if (board_hardfault_init(2, true) != 0) { + led_on(LED_BLUE); + } + +#ifdef CONFIG_MMCSD + int ret = stm32_sdio_initialize(); + + if (ret != OK) { + led_on(LED_BLUE); + return ret; + } + +#endif + +// TODO：internal flash store parameters +#if defined(FLASH_BASED_PARAMS) + static sector_descriptor_t params_sector_map[] = { + {15, 128 * 1024, 0x081E0000}, + {0, 0, 0}, + }; + + /* Initialize the flashfs layer to use heap allocated memory */ + int result = parameter_flashfs_init(params_sector_map, NULL, 0); + + if (result != OK) { + syslog(LOG_ERR, "[boot] FAILED to init params in FLASH %d\n", result); + led_on(LED_RED); + } + +#endif + + /* Configure the HW based on the manifest */ + px4_platform_configure(); + + return OK; +} diff --git a/boards/x-mav/ap-h743r1/src/led.c b/boards/x-mav/ap-h743r1/src/led.c new file mode 100644 index 0000000000..0420c1da2e --- /dev/null +++ b/boards/x-mav/ap-h743r1/src/led.c @@ -0,0 +1,113 @@ +/**************************************************************************** + * + * Copyright (c) 2021 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file led.c + * + * LED backend. + */ + +#include + +#include + +#include "chip.h" +#include "stm32_gpio.h" +#include "board_config.h" + +#include +#include + +/* + * Ideally we'd be able to get these from arm_internal.h, + * but since we want to be able to disable the NuttX use + * of leds for system indication at will and there is no + * separate switch, we need to build independent of the + * CONFIG_ARCH_LEDS configuration switch. + */ +__BEGIN_DECLS +extern void led_init(void); +extern void led_on(int led); +extern void led_off(int led); +extern void led_toggle(int led); +__END_DECLS + +# define xlat(p) (p) +static uint32_t g_ledmap[] = { + GPIO_nLED_GREEN, // Indexed by BOARD_LED_GREEN + GPIO_nLED_BLUE, // Indexed by BOARD_LED_BLUE + GPIO_nLED_RED, // Indexed by BOARD_LED_RED +}; + +__EXPORT void led_init(void) +{ + /* Configure LED GPIOs for output */ + for (size_t l = 0; l < (sizeof(g_ledmap) / sizeof(g_ledmap[0])); l++) { + if (g_ledmap[l] != 0) { + stm32_configgpio(g_ledmap[l]); + } + } +} + +static void phy_set_led(int led, bool state) +{ + /* Drive Low to switch on */ + if (g_ledmap[led] != 0) { + stm32_gpiowrite(g_ledmap[led], !state); + } +} + +static bool phy_get_led(int led) +{ + /* If Low it is on */ + if (g_ledmap[led] != 0) { + return !stm32_gpioread(g_ledmap[led]); + } + + return false; +} + +__EXPORT void led_on(int led) +{ + phy_set_led(xlat(led), true); +} + +__EXPORT void led_off(int led) +{ + phy_set_led(xlat(led), false); +} + +__EXPORT void led_toggle(int led) +{ + phy_set_led(xlat(led), !phy_get_led(xlat(led))); +} diff --git a/boards/x-mav/ap-h743r1/src/mtd.cpp b/boards/x-mav/ap-h743r1/src/mtd.cpp new file mode 100644 index 0000000000..e374a9be7e --- /dev/null +++ b/boards/x-mav/ap-h743r1/src/mtd.cpp @@ -0,0 +1,77 @@ +/**************************************************************************** + * + * Copyright (C) 2020 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ +//TODO:Prepare for NxtDual + +#include +#include +// KiB BS nB +static const px4_mft_device_t spi5 = { // FM25V02A on FMUM native: 32K X 8, emulated as (1024 Blocks of 32) + .bus_type = px4_mft_device_t::SPI, + .devid = SPIDEV_FLASH(0) +}; + +static const px4_mtd_entry_t fmum_fram = { + .device = &spi5, + .npart = 1, + .partd = { + { + .type = MTD_PARAMETERS, + .path = "/fs/mtd_params", + .nblocks = 32 + } + }, +}; + +static const px4_mtd_manifest_t board_mtd_config = { + .nconfigs = 1, + .entries = { + &fmum_fram + } +}; + +static const px4_mft_entry_s mtd_mft = { + .type = MTD, + .pmft = (void *) &board_mtd_config, +}; + +static const px4_mft_s mft = { + .nmft = 1, + .mfts = { + &mtd_mft + } +}; + +const px4_mft_s *board_get_manifest(void) +{ + return &mft; +} diff --git a/boards/x-mav/ap-h743r1/src/sdio.c b/boards/x-mav/ap-h743r1/src/sdio.c new file mode 100644 index 0000000000..869d757756 --- /dev/null +++ b/boards/x-mav/ap-h743r1/src/sdio.c @@ -0,0 +1,177 @@ +/**************************************************************************** + * + * Copyright (C) 2014, 2016 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include "chip.h" +#include "board_config.h" +#include "stm32_gpio.h" +#include "stm32_sdmmc.h" + +#ifdef CONFIG_MMCSD + + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/* Card detections requires card support and a card detection GPIO */ + +#define HAVE_NCD 1 +#if !defined(GPIO_SDMMC1_NCD) +# undef HAVE_NCD +#endif + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +static FAR struct sdio_dev_s *sdio_dev; +#ifdef HAVE_NCD +static bool g_sd_inserted = 0xff; /* Impossible value */ +#endif + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: stm32_ncd_interrupt + * + * Description: + * Card detect interrupt handler. + * + ****************************************************************************/ + +#ifdef HAVE_NCD +static int stm32_ncd_interrupt(int irq, FAR void *context) +{ + bool present; + + present = !stm32_gpioread(GPIO_SDMMC1_NCD); + + if (sdio_dev && present != g_sd_inserted) { + sdio_mediachange(sdio_dev, present); + g_sd_inserted = present; + } + + return OK; +} +#endif + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: stm32_sdio_initialize + * + * Description: + * Initialize SDIO-based MMC/SD card support + * + ****************************************************************************/ + +int stm32_sdio_initialize(void) +{ + int ret; + +#ifdef HAVE_NCD + /* Card detect */ + + bool cd_status; + + /* Configure the card detect GPIO */ + + stm32_configgpio(GPIO_SDMMC1_NCD); + + /* Register an interrupt handler for the card detect pin */ + + stm32_gpiosetevent(GPIO_SDMMC1_NCD, true, true, true, stm32_ncd_interrupt); +#endif + + /* Mount the SDIO-based MMC/SD block driver */ + /* First, get an instance of the SDIO interface */ + + finfo("Initializing SDIO slot %d\n", SDIO_SLOTNO); + + sdio_dev = sdio_initialize(SDIO_SLOTNO); + + if (!sdio_dev) { + syslog(LOG_ERR, "[boot] Failed to initialize SDIO slot %d\n", SDIO_SLOTNO); + return -ENODEV; + } + + /* Now bind the SDIO interface to the MMC/SD driver */ + + finfo("Bind SDIO to the MMC/SD driver, minor=%d\n", SDIO_MINOR); + + ret = mmcsd_slotinitialize(SDIO_MINOR, sdio_dev); + + if (ret != OK) { + syslog(LOG_ERR, "[boot] Failed to bind SDIO to the MMC/SD driver: %d\n", ret); + return ret; + } + + finfo("Successfully bound SDIO to the MMC/SD driver\n"); + +#ifdef HAVE_NCD + /* Use SD card detect pin to check if a card is g_sd_inserted */ + + cd_status = !stm32_gpioread(GPIO_SDMMC1_NCD); + finfo("Card detect : %d\n", cd_status); + + sdio_mediachange(sdio_dev, cd_status); +#else + /* Assume that the SD card is inserted. What choice do we have? */ + + sdio_mediachange(sdio_dev, true); +#endif + + return OK; +} + +#endif /* CONFIG_MMCSD */ diff --git a/boards/x-mav/ap-h743r1/src/spi.cpp b/boards/x-mav/ap-h743r1/src/spi.cpp new file mode 100644 index 0000000000..4b262023ea --- /dev/null +++ b/boards/x-mav/ap-h743r1/src/spi.cpp @@ -0,0 +1,52 @@ +/**************************************************************************** + * + * Copyright (C) 2021 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +#include +#include +#include + +constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = { + initSPIBus(SPI::Bus::SPI1, { + initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortA, GPIO::Pin2}, SPI::DRDY{GPIO::PortA, GPIO::Pin4}), + initSPIDevice(DRV_IMU_DEVTYPE_BMI270, SPI::CS{GPIO::PortA, GPIO::Pin2}, SPI::DRDY{GPIO::PortA, GPIO::Pin4}) + }), + initSPIBus(SPI::Bus::SPI3, { + initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortD, GPIO::Pin4}) + }), + initSPIBus(SPI::Bus::SPI4, { + initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortC, GPIO::Pin13}, SPI::DRDY{GPIO::PortE, GPIO::Pin4}), + initSPIDevice(DRV_IMU_DEVTYPE_BMI270, SPI::CS{GPIO::PortC, GPIO::Pin13}, SPI::DRDY{GPIO::PortE, GPIO::Pin4}) + }), +}; + +static constexpr bool unused = validateSPIConfig(px4_spi_buses); diff --git a/boards/x-mav/ap-h743r1/src/timer_config.cpp b/boards/x-mav/ap-h743r1/src/timer_config.cpp new file mode 100644 index 0000000000..73cee06f31 --- /dev/null +++ b/boards/x-mav/ap-h743r1/src/timer_config.cpp @@ -0,0 +1,53 @@ +/**************************************************************************** + * + * Copyright (C) 2021 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +#include + +constexpr io_timers_t io_timers[MAX_IO_TIMERS] = { + initIOTimer(Timer::Timer1, DMA{DMA::Index1}), + initIOTimer(Timer::Timer2, DMA{DMA::Index1}), + initIOTimer(Timer::Timer3, DMA{DMA::Index1}), +}; + +constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = { + initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel1}, {GPIO::PortE, GPIO::Pin9}), + initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel2}, {GPIO::PortE, GPIO::Pin11}), + initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel3}, {GPIO::PortE, GPIO::Pin13}), + initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel4}, {GPIO::PortE, GPIO::Pin14}), + initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel4}, {GPIO::PortB, GPIO::Pin1}), + initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel3}, {GPIO::PortB, GPIO::Pin0}), + initIOTimerChannel(io_timers, {Timer::Timer2, Timer::Channel1}, {GPIO::PortA, GPIO::Pin0}) +}; + +constexpr io_timers_channel_mapping_t io_timers_channel_mapping = + initIOTimerChannelMapping(io_timers, timer_io_channels); diff --git a/boards/x-mav/ap-h743r1/src/usb.c b/boards/x-mav/ap-h743r1/src/usb.c new file mode 100644 index 0000000000..9591784866 --- /dev/null +++ b/boards/x-mav/ap-h743r1/src/usb.c @@ -0,0 +1,78 @@ +/**************************************************************************** + * + * Copyright (C) 2021 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file usb.c + * + * Board-specific USB functions. + */ + +#include "board_config.h" +#include +#include +#include +#include + +/************************************************************************************ + * Name: stm32_usbinitialize + * + * Description: + * Called to setup USB-related GPIO pins for the board. + * + ************************************************************************************/ + +__EXPORT void stm32_usbinitialize(void) +{ + /* The OTG FS has an internal soft pull-up */ + + /* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */ + +#ifdef CONFIG_STM32H7_OTGFS + stm32_configgpio(GPIO_OTGFS_VBUS); +#endif +} + +/************************************************************************************ + * Name: stm32_usbsuspend + * + * Description: + * Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is + * used. This function is called whenever the USB enters or leaves suspend mode. + * This is an opportunity for the board logic to shutdown clocks, power, etc. + * while the USB is suspended. + * + ************************************************************************************/ +__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume) +{ + uinfo("resume: %d\n", resume); +} diff --git a/docs/assets/flight_controller/x-mav_ap-h743r1/ap-h743r1-main.png b/docs/assets/flight_controller/x-mav_ap-h743r1/ap-h743r1-main.png new file mode 100644 index 0000000000..56efaa40a3 Binary files /dev/null and b/docs/assets/flight_controller/x-mav_ap-h743r1/ap-h743r1-main.png differ diff --git a/docs/assets/flight_controller/x-mav_ap-h743r1/ap-h743r1-pinouts.png b/docs/assets/flight_controller/x-mav_ap-h743r1/ap-h743r1-pinouts.png new file mode 100644 index 0000000000..f4daf38a03 Binary files /dev/null and b/docs/assets/flight_controller/x-mav_ap-h743r1/ap-h743r1-pinouts.png differ diff --git a/docs/assets/flight_controller/x-mav_ap-h743r1/ap-h743r1-size.png b/docs/assets/flight_controller/x-mav_ap-h743r1/ap-h743r1-size.png new file mode 100644 index 0000000000..8796767c25 Binary files /dev/null and b/docs/assets/flight_controller/x-mav_ap-h743r1/ap-h743r1-size.png differ diff --git a/docs/en/SUMMARY.md b/docs/en/SUMMARY.md index 7965ba8c0d..456fc83df6 100644 --- a/docs/en/SUMMARY.md +++ b/docs/en/SUMMARY.md @@ -194,6 +194,7 @@ - [SVehicle E2](flight_controller/svehicle_e2.md) - [ThePeach FCC-K1](flight_controller/thepeach_k1.md) - [ThePeach FCC-R1](flight_controller/thepeach_r1.md) + - [AP-H743-R1](flight_controller/x-mav_ap-h743r1.md) - [Experimental Autopilots](flight_controller/autopilot_experimental.md) - [BeagleBone Blue](flight_controller/beaglebone_blue.md) - [Raspberry Pi 2/3 Navio2](flight_controller/raspberry_pi_navio2.md) diff --git a/docs/en/flight_controller/autopilot_manufacturer_supported.md b/docs/en/flight_controller/autopilot_manufacturer_supported.md index 46885eaf82..aa1d4cb5cb 100644 --- a/docs/en/flight_controller/autopilot_manufacturer_supported.md +++ b/docs/en/flight_controller/autopilot_manufacturer_supported.md @@ -39,3 +39,4 @@ The boards in this category are: - [Svehicle E2](../flight_controller/svehicle_e2.md) - [ThePeach FCC-K1](../flight_controller/thepeach_k1.md) - [ThePeach FCC-R1](../flight_controller/thepeach_r1.md) +- [X-MAV AP-H743-R1](../flight_controller/x-mav_ap-h743r1.md) diff --git a/docs/en/flight_controller/x-mav_ap-h743r1.md b/docs/en/flight_controller/x-mav_ap-h743r1.md new file mode 100644 index 0000000000..435d39b640 --- /dev/null +++ b/docs/en/flight_controller/x-mav_ap-h743r1.md @@ -0,0 +1,145 @@ +# AP-H743-R1 + + + +:::warning +PX4 does not manufacture this (or any) autopilot. +::: + +The AP-H743-R1 is an advanced autopilot manufactured by X-MAV®. + +The autopilot is recommended for commercial system integration, but is also suitable for academic research and any other applications. +It brings you ultimate performance, stability, and reliability in every aspect. + +![AP-H743-R1](../../assets/flight_controller/x-mav_ap-h743r1/ap-h743r1-main.png) + +::: info +These flight controllers are [manufacturer supported](../flight_controller/autopilot_manufacturer_supported.md). +::: + +### Processors & Sensors + +- FMU Processor: STM32H743VIT6 + - 32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM +- IO Processor: STM32F103 + - 32 Bit Arm® Cortex®-M3, 72MHz, 20KB SRAM +- On-board sensors + - Accel/Gyro: ICM-42688-P\*2(Version1), BMI270\*2(Version2) + - Mag: IST8310 + - Barometer: DPS310(Version1),SPL06(Version2) + +### Interfaces + +- 15x PWM Servo Outputs +- 1x Dedicated S.Bus Input +- 3x TELEM Ports +- 1x SERIAL4 Port +- 2x GPS Ports +- 1x USB Port (TYPE-C) +- 3x I2C Bus Ports +- 2x CAN Ports +- 2x Power Input Ports + - ADC Power Input + - DroneCAN/UAVCAN Power Input +- 2x Dedicated Debug Port + - FMU Debug + - IO Debug + +## Purchase Channels + +Order from [X-MAV](https://www.x-mav.cn/). + +## Radio Control +A Radio Control (RC) system is required if you want to manually control your vehicle (PX4 does not require a radio system for autonomous flight modes). + +You will need to select a compatible transmitter/receiver and then bind them so that they communicate (read the instructions that come with your specific transmitter/receiver). + +SBUS receivers connect to the SBUS-IN input port. +CRSF receiver must be wired to a spare port (UART) on the Flight Controller. Then you can bind the transmitter and receiver together. + +## Serial Port Mapping + +| UART | Device | Port | +| ------ | ---------- | ------------- | +| USART1 | /dev/ttyS0 | GPS | +| USART2 | /dev/ttyS1 | GPS2 | +| USART3 | /dev/ttyS2 | TELEM1 | +| UART4 | /dev/ttyS3 | TELEM2 | +| UART7 | /dev/ttyS4 | TELEM3 | +| UART8 | /dev/ttyS5 | SERIAL4 | + +## PWM Output + +The AP-H743-R1 flight controller supports up to 15 PWM outputs. +The first 8 outputs (labelled M1 to M8) are controlled by a dedicated STM32F103 IOMCU controller. +The remaining 7 outputs (labelled A1 to A7) are the "auxiliary" outputs. +These are directly attached to the STM32H743 FMU controller . + +The 15 PWM outputs are: + +M1 - M8 are connected to the IOMCU. +A1 - A7 are connected to the FMU. + +M1 - M8 support DShot and are in 3 groups: + +- M1, M2 in group 1 +- M3, M4 in group 2 +- M5, M6, M7, M8 in group 3 + +The 7 FMU PWM outputs are in 3 groups: + +- A1 - A4 are in one group. +- A5, A6 are in a 2nd group. +- A7 is in a 3nd group. + +Channels within the same group need to use the same output rate. +If any channel in a group uses DShot then all channels in the group need to use DShot. + +### Electrical data + +- Voltage Ratings: + - Max input voltage: 5.4V + - USB Power Input: 4.75\~5.25V + - Servo Rail Input: 0\~9.9V + +## Battery Monitoring + +The board has connectors for 2 power monitors. + +- POWER1 -- ADC +- POWER2 -- DroneCAN + +The board is configure by default for a analog power monitor, and also has DroneCAN power monitor configured which is enabled. + +## Building Firmware + +To [build PX4](../dev_setup/building_px4.md) for this target, execute: + +```sh +make x-mav_ap-h743r1_default +``` + +## Pinouts and Size + +![AP-H743-R1 pinouts](../../assets/flight_controller/x-mav_ap-h743r1/ap-h743r1-pinouts.png) + +![AP-H743-R1](../../assets/flight_controller/x-mav_ap-h743r1/ap-h743r1-size.png) + +## Supported Platforms / Airframes + +Any multirotor/airplane/rover or boat that can be controlled using normal RC servos or Futaba S-Bus servos. +The complete set of supported configurations can be found in the [Airframe Reference](../airframes/airframe_reference.md). + +## Debug Port + +### SWD +The [SWD interface](../debug/swd_debug.md) operate on the **FMU-DEBUG** port (`FMU-DEBUG`). + +The debug port (`FMU-DEBUG`) uses a [JST SM04B-GHS-TB](https://www.digikey.com/en/products/detail/jst-sales-america-inc/SM04B-GHS-TB/807788) connector and has the following pinout: + +| Pin | Signal | Volt | +| ------- | -------------- | ----- | +| 1 (red) | 5V+ | +5V | +| 2 (blk) | FMU_SWDIO | +3.3V | +| 3 (blk) | FMU_SWCLK | +3.3V | +| 4 (blk) | GND | GND |