UAV-develop/PX4-Autopilot
1
0
Fork 0
mirror of https://github.com/PX4/PX4-Autopilot.git synced 2026-07-26 16:28:06 +08:00
Code Issues Packages Projects Releases Wiki Activity

docs: Codespell check on English sources + swd fixes (#26657)

Browse Source
This commit is contained in:
Hamish Willee
2026-03-05 12:50:59 +11:00
committed by GitHub
parent 5528ebec64
commit b37733459d
96 changed files with 180 additions and 174 deletions
Download Patch File Download Diff File Expand all files Collapse all files

10
docs/en/peripherals/adsb_flarm.md
View File

@@ -53,7 +53,7 @@ The TX and RX on the flight controller must be connected to the RX and TX on the
### Port Configuration
The recievers are configured in the same way as any other [MAVLink Peripheral](../peripherals/mavlink_peripherals.md).
The receivers are configured in the same way as any other [MAVLink Peripheral](../peripherals/mavlink_peripherals.md).
The only _specific_ setup is that the port baud rate must be set to 57600 and the a low-bandwidth profile (`MAV_X_MODE`).
Assuming you have connected the device to the TELEM2 port, [set the parameters](../advanced_config/parameters.md) as shown:
@@ -74,7 +74,7 @@ Configure the action when there is a potential collision using the parameter bel
| Parameter | Description |
| ----------------------------------------------------------------------------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| <a id="NAV_TRAFF_AVOID"></a>[NAV_TRAFF_AVOID](../advanced_config/parameter_reference.md#NAV_TRAFF_AVOID) | Enable traffic avoidance mode specify avoidance response. 0: Disable, 1: Warn only, 2: Return mode, 3: Land mode. |
| <a id="NAV_TRAFF_A_HOR"></a>[NAV_TRAFF_A_HOR](../advanced_config/parameter_reference.md#NAV_TRAFF_A_HOR) | Horizonal radius of cylinder around the vehicle that defines its airspace (i.e. the airspace in the ground plane). |
| <a id="NAV_TRAFF_A_HOR"></a>[NAV_TRAFF_A_HOR](../advanced_config/parameter_reference.md#NAV_TRAFF_A_HOR) | Horizontal radius of cylinder around the vehicle that defines its airspace (i.e. the airspace in the ground plane). |
| <a id="NAV_TRAFF_A_VER"></a>[NAV_TRAFF_A_VER](../advanced_config/parameter_reference.md#NAV_TRAFF_A_VER) | Vertical height above and below vehicle of the cylinder that defines its airspace (also see [NAV_TRAFF_A_HOR](#NAV_TRAFF_A_HOR)). |
| <a id="NAV_TRAFF_COLL_T"></a>[NAV_TRAFF_COLL_T](../advanced_config/parameter_reference.md#NAV_TRAFF_COLL_T) | Collision time threshold. Avoidance will trigger if the estimated time until collision drops below this value (the estimated time is based on relative speed of traffic and UAV). |
@@ -136,8 +136,8 @@ Use with care in real flight!
To enable this feature:
1. Uncomment the code in `AdsbConflict::run_fake_traffic()`([AdsbConflict.cpp](https://github.com/PX4/PX4-Autopilot/blob/main/src/lib/adsb/AdsbConflict.cpp#L342C1-L342C1)).
1. Rebuild and run PX4.
1. Execute the [`navigator fake_traffic` command](../modules/modules_controller.md#navigator) in the [QGroundControl MAVLink Shell](https://docs.qgroundcontrol.com/master/en/qgc-user-guide/analyze_view/mavlink_console.html) (or some other [PX4 Console or MAVLink shell](../debug/consoles.md), such as the PX4 simulator terminal).
2. Rebuild and run PX4.
3. Execute the [`navigator fake_traffic` command](../modules/modules_controller.md#navigator) in the [QGroundControl MAVLink Shell](https://docs.qgroundcontrol.com/master/en/qgc-user-guide/analyze_view/mavlink_console.html) (or some other [PX4 Console or MAVLink shell](../debug/consoles.md), such as the PX4 simulator terminal).
The code in `run_fake_traffic()` is then executed.
You should see ADS-B warnings in the Console/MAVLink shell, and QGC should also show an ADS-B traffic popup.
@@ -147,7 +147,7 @@ These simulate ADS-B traffic where there may be a conflict, where there won't be
::: details Information about the test methods
The relevent methods are defined in [AdsbConflict.cpp](https://github.com/PX4/PX4-Autopilot/blob/main/src/lib/adsb/AdsbConflict.cpp#L342C1-L342C1).
The relevant methods are defined in [AdsbConflict.cpp](https://github.com/PX4/PX4-Autopilot/blob/main/src/lib/adsb/AdsbConflict.cpp#L342C1-L342C1).
#### `run_fake_traffic()` method