Files
bootloader/include/crc_check.h
T
robinson c90c187749 feat: 完成 STM32 Bootloader 核心功能实现和测试框架
新增核心模块:
- bootloader.c: Bootloader 主逻辑,状态机,命令处理
- protocol.c: 通信协议,帧解析,CRC16 验证
- boot_jump.c: 启动跳转,VTOR 重定向,应用程序有效性检查
- firmware_mgr.c: 固件管理,双 Bank 支持
- crc_check.c: CRC32 计算与验证 (ISO 9809-2 标准)
- aes_crypto.c: AES-256 解密 (ECB 模式)
- boot_trigger.c: 触发机制,魔术字,按键检测
- version_mgr.c: 版本管理,固件版本读取、更新、回滚

新增头文件:
- include/protocol.h: 协议接口定义
- include/boot_jump.h: 跳转接口定义
- include/firmware_mgr.h: 固件管理接口定义
- include/crc_check.h: CRC 校验接口定义
- include/aes_crypto.h: AES 加密接口定义
- include/boot_trigger.h: 触发机制接口定义
- include/version_mgr.h: 版本管理接口定义

修复现有 Bug:
- flash_port.c: 修复变量名错误 (word_data -> chunk_data)
- flash_port.c: 添加 Flash 解锁 (HAL_FLASH_Unlock)
- bsp_uart.c: 添加 uart_port_register 调用
- bsp_flash.c: 添加 flash_port_register 调用
- CMakeLists.txt: 取消核心模块注释,添加条件编译

新增测试框架 (tests/):
- unit/: 单元测试 (CRC32, AES, Boot Jump, Protocol)
- integration/: 集成测试 (完整升级流程)
- pc_tool/: PC 端烧录工具和测试固件生成器
- 提供一键编译运行脚本 (run_tests.sh, run_tests.bat)
- 完整测试文档 (README.md, TEST_REPORT.md)

配置更新:
- 所有功能默认启用 (AES, CRC, Dual Bank, Version Mgr)
- 支持条件编译和模块化配置

测试状态:
- 单元测试:36 个用例全部通过
- 集成测试:6 个场景全部通过
- 功能闭环验证完成
2026-04-05 15:49:04 +08:00

24 lines
522 B
C

#ifndef CRC_CHECK_H
#define CRC_CHECK_H
#include <stdint.h>
#include <stdbool.h>
#include "bootloader_config.h"
#if BOOT_ENABLE_CRC
/* 计算 CRC32 */
uint32_t crc32_calc(const uint8_t *data, uint32_t length);
/* 验证 CRC32 */
bool crc32_verify(const uint8_t *data, uint32_t length, uint32_t expected_crc);
/* 使用硬件 CRC 外设计算 CRC32 (STM32F4xx) */
#if defined(STM32F4XX) || defined(STM32F407xx)
uint32_t crc32_calc_hw(const uint8_t *data, uint32_t length);
#endif
#endif /* BOOT_ENABLE_CRC */
#endif