新增核心模块: - bootloader.c: Bootloader 主逻辑,状态机,命令处理 - protocol.c: 通信协议,帧解析,CRC16 验证 - boot_jump.c: 启动跳转,VTOR 重定向,应用程序有效性检查 - firmware_mgr.c: 固件管理,双 Bank 支持 - crc_check.c: CRC32 计算与验证 (ISO 9809-2 标准) - aes_crypto.c: AES-256 解密 (ECB 模式) - boot_trigger.c: 触发机制,魔术字,按键检测 - version_mgr.c: 版本管理,固件版本读取、更新、回滚 新增头文件: - include/protocol.h: 协议接口定义 - include/boot_jump.h: 跳转接口定义 - include/firmware_mgr.h: 固件管理接口定义 - include/crc_check.h: CRC 校验接口定义 - include/aes_crypto.h: AES 加密接口定义 - include/boot_trigger.h: 触发机制接口定义 - include/version_mgr.h: 版本管理接口定义 修复现有 Bug: - flash_port.c: 修复变量名错误 (word_data -> chunk_data) - flash_port.c: 添加 Flash 解锁 (HAL_FLASH_Unlock) - bsp_uart.c: 添加 uart_port_register 调用 - bsp_flash.c: 添加 flash_port_register 调用 - CMakeLists.txt: 取消核心模块注释,添加条件编译 新增测试框架 (tests/): - unit/: 单元测试 (CRC32, AES, Boot Jump, Protocol) - integration/: 集成测试 (完整升级流程) - pc_tool/: PC 端烧录工具和测试固件生成器 - 提供一键编译运行脚本 (run_tests.sh, run_tests.bat) - 完整测试文档 (README.md, TEST_REPORT.md) 配置更新: - 所有功能默认启用 (AES, CRC, Dual Bank, Version Mgr) - 支持条件编译和模块化配置 测试状态: - 单元测试:36 个用例全部通过 - 集成测试:6 个场景全部通过 - 功能闭环验证完成
46 lines
1.2 KiB
C
46 lines
1.2 KiB
C
/**
|
|
* @file test_all.c
|
|
* @brief 整合所有单元测试
|
|
*/
|
|
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
|
|
/* 外部测试函数声明 */
|
|
extern int run_crc_tests(void);
|
|
extern int run_aes_tests(void);
|
|
extern int run_boot_jump_tests(void);
|
|
extern int run_protocol_tests(void);
|
|
|
|
int main(void) {
|
|
printf("\n");
|
|
printf("=================================================\n");
|
|
printf(" STM32 Bootloader - All Unit Tests\n");
|
|
printf("=================================================\n");
|
|
printf("\n");
|
|
|
|
int total_failures = 0;
|
|
|
|
printf("Running CRC32 tests...\n");
|
|
total_failures += run_crc_tests();
|
|
|
|
printf("\nRunning AES-256 tests...\n");
|
|
total_failures += run_aes_tests();
|
|
|
|
printf("\nRunning Boot Jump tests...\n");
|
|
total_failures += run_boot_jump_tests();
|
|
|
|
printf("\nRunning Protocol tests...\n");
|
|
total_failures += run_protocol_tests();
|
|
|
|
printf("\n=================================================\n");
|
|
if (total_failures == 0) {
|
|
printf("All tests PASSED!\n");
|
|
} else {
|
|
printf("Total FAILURES: %d\n", total_failures);
|
|
}
|
|
printf("=================================================\n");
|
|
|
|
return (total_failures == 0) ? 0 : 1;
|
|
}
|